Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SO 8

This is information on a product in full production.

December 2012 Doc ID 15688 Rev 5 1/30

TSV632, TSV632A, TSV633, TSV633A,

TSV634, TSV634A, TSV635, TSV635A

Dual and quad, rail-to-rail input/output, 60 μA, 880 kHz operational

amplifiers

Datasheet − production data

Features

■ Rail-to-rail input and output

■ Low power consumption: 60 µA typ at 5 V

■ Low supply voltage: 1.5 V - 5.5 V

■ Gain bandwidth product: 880 kHz typ

■ Unity gain stable on 100 pF capacitor

■ Low power shutdown mode: 5 nA typ

■ Low offset voltage: 800 µV max (A version)

■ Low input bias current: 1 pA typ

■ EMI hardened op amps

■ Automotive qualification

Summary of content (30 pages)

PAGE 1
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Dual and quad, rail-to-rail input/output, 60 μA, 880 kHz operational amplifiers Datasheet − production data Features ■ Rail-to-rail input and output ■ Low power consumption: 60 µA typ at 5 V ■ Low supply voltage: 1.5 V - 5.
PAGE 2
Contents TSV63x, TSV63xA Contents 1 Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 4.1 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
TSV63x, TSV63xA 1 Package pin connections Package pin connections Figure 1. Pin connections for each package (top view) Out1 1 In1- 2 _ 3 + In1+ VCC- 4 8 VCC+ /54 7 Out2 ). _ 6 In2- + 5 In2+ 1 2 _ In1+ 3 + VCC- 4 SHDN1 5 /54 ). ). 6## ). TSV632 DFN8 2x2 10 VCC+ In1- 6## .
PAGE 4
Absolute maximum ratings and operating conditions 2 TSV63x, TSV63xA Absolute maximum ratings and operating conditions Table 2. Absolute maximum ratings (AMR) Symbol VCC Vid Vin Iin SHDN Tstg Parameter Supply voltage (1) Input voltage Input current (4) Shutdown voltage (2) ±VCC (3) Storage temperature Tj Maximum junction temperature HBM: human body model(7) model(8) CDM: charged device 10 mA VCC- - 0.2 to VCC++ 0.2 V -65 to +150 °C ambient(5)(6) Rthja MM: machine V VCC- - 0.
PAGE 5
TSV63x, TSV63xA Electrical characteristics 3 Electrical characteristics Table 4. Electrical characteristics at VCC+ = +1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio ΔVio/ΔT Iio Iib CMR TSV63x TSV63xA TSV633AIST - MiniSO10 3 0.8 1 Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 4.5 2 2.
PAGE 6
Electrical characteristics Table 5. TSV63x, TSV63xA Shutdown characteristics VCC = 1.8 V Symbol Parameter Conditions Min. Typ. Max. 2.5 50 Unit DC performance SHDN = VCCICC Supply current in shutdown mode (all channels) nA Tmin < Top < 85° C 200 Tmin < Top < 125° C 1.5 ton Amplifier turn-on time RL= 2 kΩ, Vout = VCC- to VCC-+0.2 V 200 toff Amplifier turn-off time RL = 2 kΩ, Vout = VCC+ - 0.5 V to VCC+ - 0.
PAGE 7
TSV63x, TSV63xA Table 6. Electrical characteristics VCC+ = +3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio ΔVio/ΔT Iio Iib CMR TSV63x TSV63xA TSV633AIST - MiniSO10 3 0.8 1 Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 4.5 2 2.
PAGE 8
Electrical characteristics Table 7. TSV63x, TSV63xA Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio ΔVio/ΔT Iio Iib CMR SVR Avd EMIRR VOH VOL 3 0.8 1 Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 4.5 2 2.
PAGE 9
TSV63x, TSV63xA Table 7. Electrical characteristics Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) (continued) Symbol Parameter Conditions Gm Gain margin RL = 2 kΩ, CL = 100 pF SR Slew rate RL = 2 kΩ, CL = 100 pF, Av=1 en Equivalent input noise voltage f = 1 kHz f = 10 kHz Total harmonic distortion + noise VCC = 5V, f = 1kHz, AV = 1, RL = 100kΩ, Vicm = VCC/2, Vout = 2VPP THD+en Min. 0.25 Typ.
PAGE 10
Electrical characteristics TSV63x, TSV63xA Figure 2. Supply current vs. supply voltage at Vicm = VCC/2 Figure 4. Output current vs. output voltage at Figure 5. VCC = 5 V Figure 3. Output current vs. output voltage at VCC = 1.5 V Voltage gain and phase vs. frequency at VCC = 1.5 V Ω Figure 6. 10/30 Voltage gain and phase vs. frequency at VCC = 5 V Figure 7. Doc ID 15688 Rev 5 Phase margin vs.
PAGE 11
TSV63x, TSV63xA Figure 8. Electrical characteristics Positive slew rate vs. time Figure 9. Negative slew rate vs. time Figure 10. Positive slew rate vs. supply voltage Figure 11. Negative slew rate vs. supply voltage Figure 12. Distortion + noise vs. output voltage Figure 13. Distortion + noise vs. frequency 1 Vcc=1.5V Rl=2kΩ Vcc=1.5V Rl=100kΩ THD + N (%) THD + N (%) Vcc=1.5V Rl=2kΩ f=1kHz Gain=1 BW=22kHz Vicm=Vcc/2 Vcc=5.5V Rl=2kΩ 0.1 Vcc=1.5V Rl=100kΩ 0.01 Ω Vcc=5.
PAGE 12
Electrical characteristics TSV63x, TSV63xA Figure 15. EMIRR vs. frequency at Vcc = 5 V, T = 25° C 300 120 Vcc=5V Tamb=25 C 250 100 200 EMIRR Vpeak (dB) Equivalent Input Voltage Noise (nV/VHz) Figure 14. Noise vs. frequency Vicm=2.5V 150 100 60 40 Vicm=4.
PAGE 13
TSV63x, TSV63xA Application information 4 Application information 4.1 Operating voltages The TSV63x and TSV63xA can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8-, 3.3-, and 5-V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV63x and TSV63xA characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40° C to +125° C. 4.
PAGE 14
Application information 4.4 TSV63x, TSV63xA Shutdown function (TSV633, TSV635) The operational amplifiers are enabled when the SHDN pin is pulled high. To disable the amplifiers, the SHDN must be pulled down to VCC-. When in shutdown mode, the amplifiers’ output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC+ or VCC-. The turn-on and turn-off times are calculated for an output variation of ±200 mV. Figure 18 and Figure 19 show the test configurations.
PAGE 15
TSV63x, TSV63xA 4.5 Application information Optimization of DC and AC parameters These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR, and Avd, benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability.
PAGE 16
Application information 4.8 TSV63x, TSV63xA Macromodel Two accurate macromodels (with or without the shutdown feature) of the TSV63x and TSV63xA are available on STMicroelectronics’ web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x and TSV63xA operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet.
PAGE 17
TSV63x, TSV63xA 5 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
PAGE 18
Package information 5.1 TSV63x, TSV63xA SOT23-8 package information Figure 23. SOT23-8 package mechanical drawing Table 9. SOT23-8 package mechanical data Dimensions Ref. Millimeters Min. 18/30 Typ. Inches Max. Min. Typ. Max. A 1.45 0.057 A1 0.15 0.006 A2 0.90 1.30 0.035 0.051 b 0.22 0.38 0.009 0.015 c 0.08 0.22 0.003 0.009 D 2.80 3.00 0.110 0.118 E 2.60 3.00 0.102 0.118 E1 1.50 1.75 0.059 0.069 e 0.65 0.026 e1 1.95 0.077 L 0.30 0.60 0.012 0.
PAGE 19
TSV63x, TSV63xA 5.2 Package information SO-8 package information Figure 24. SO-8 package mechanical drawing Table 10. SO-8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.75 0.069 A1 0.10 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 0.25 Max. 0.004 0.010 0.049 1.27 0.050 h 0.25 0.50 0.
PAGE 20
Package information 5.3 TSV63x, TSV63xA DFN8 2x2 package information Figure 25. DFN8 2x2 mm package mechanical drawing Table 11. DFN8 2 x 2 mm package mechanical data (pitch 0.5 mm) Dimensions Ref. A Millimeters Min. Typ. Max. Min. Typ. Max. 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 A3 0.002 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.073 0.079 0.085 E2 0.75 0.
PAGE 21
TSV63x, TSV63xA Package information Figure 26.
PAGE 22
Package information 5.4 TSV63x, TSV63xA MiniSO-8 package information Figure 27. MiniSO-8 package mechanical drawing Table 12. MiniSO-8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.10 A1 0 A2 0.75 b Max. 0.043 0.15 0 0.95 0.030 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.110 0.118 0.122 e L 0.85 0.65 0.40 0.60 0.006 0.033 0.
PAGE 23
TSV63x, TSV63xA 5.5 Package information MiniSO-10 package information Figure 28. MiniSO-10 package mechanical drawing Table 13. MiniSO-10 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.10 Max. 0.043 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.78 0.86 0.94 0.031 0.034 0.037 b 0.25 0.33 0.40 0.010 0.013 0.016 c 0.15 0.23 0.30 0.006 0.009 0.012 D 2.90 3.00 3.10 0.114 0.118 0.122 E 4.75 4.90 5.05 0.187 0.193 0.
PAGE 24
Package information 5.6 TSV63x, TSV63xA TSSOP14 package information Figure 29. TSSOP14 package mechanical drawing Table 14. TSSOP14 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.
PAGE 25
TSV63x, TSV63xA 5.7 Package information TSSOP16 package information Figure 30. TSSOP16 package mechanical drawing b Table 15. TSSOP16 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 k 0° L 0.
PAGE 26
Package information 5.8 TSV63x, TSV63xA QFN16 3x3 package information Figure 31. QFN16 3x3 package mechanical drawing 1&.
PAGE 27
TSV63x, TSV63xA Table 16. Package information QFN16 3x3 mm package mechanical data (pitch 0.5 mm) Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.80 0.90 1.00 0.031 0.035 0.039 A1 0 0.05 0 A3 0.20 b 0.18 D 2.90 D2 1.50 E 2.90 E2 1.50 e L 3.00 3.00 0.008 0.30 0.007 3.10 0.114 1.80 0.059 3.10 0.114 1.80 0.059 0.50 0.30 0.002 0.012 0.118 0.122 0.071 0.118 0.122 0.071 0.020 0.50 0.012 0.020 Figure 32.
PAGE 28
Ordering information 6 TSV63x, TSV63xA Ordering information Table 17.
PAGE 29
TSV63x, TSV63xA 7 Revision history Revision history Table 18. Document revision history Date Revision 25-May-2009 1 Initial release. 15-Jun-2009 2 Corrected pin connection diagram in Figure 1. 03-Sep-2009 3 Added root part numbers (TSv63xA) and Table 1: Device summary on cover page. Added order code TSV632AILT in Table 17: Order codes. 4 Chapter 5: added DFN8 2x2 package mechanical drawing. Added ordering information for DFN package to Table 17: Order codes.
PAGE 30
TSV63x, TSV63xA Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.