TSV63x, TSV63xA Dual and quad, rail-to-rail input/output, 60 µA, 880 kHz operational amplifiers Datasheet - production data Related products See the TSV52x series for higher merit factor (1.
Contents TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Contents 1 Package pin connections................................................................ 3 2 3 Absolute maximum ratings and operating conditions ................. 4 Electrical characteristics ................................................................ 6 4 Application information ................................................................ 14 5 4.1 Operating voltages ......................................
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 1 Package pin connections Package pin connections Figure 1: Pin connections for each package (top view) 1. The exposed pads of the DFN8 2x2 and the QFN16 3x3 can be connected to V CC- or left floating.
Absolute maximum ratings and operating conditions 2 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Absolute maximum ratings and operating conditions Table 2: Absolute maximum ratings (AMR) Symbol VCC Vid Vin Iin SHDN Parameter Supply voltage Value (1) Unit 6 Differential input voltage (2) ±VCC V Input voltage (3) (VCC-) - 0.2 to (VCC+) + 0.2 Input current (4) 10 mA (VCC-) - 0.2 to (VCC+) + 0.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Absolute maximum ratings and operating conditions Table 3: Operating conditions Symbol Parameter VCC Supply voltage VICM Common-mode input voltage range Toper Operating free-air temperature range Value 1.5 to 5.5 DocID15688 Rev 6 (VCC-) - 0.1 to (VCC+) + 0.
Electrical characteristics 3 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Electrical characteristics Table 4: Electrical characteristics at VCC+ = 1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance TSV63x 3 TSV63xA Vio Offset voltage 0.8 TSV633AIST (MiniSO10) 1 Tmin < Top < Tmax - TSV63x 4.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Electrical characteristics Table 5: Shutdown characteristics VCC = 1.8 V Symbol Parameter Conditions Min. Typ. Max. 2.5 50 Unit DC performance SHDN = VCCICC Supply current in shutdown mode (all channels) Tmin < Top < 85° C 200 Tmin < Top < 125° C 1.5 ton Amplifier turn-on time RL = 2 kΩ, Vout = (VCC-) to (VCC-) + 0.2 V 200 toff Amplifier turn-off time RL = 2 kΩ, Vout = (VCC+) - 0.5 V to (VCC+) - 0.
Electrical characteristics TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Table 6: VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance TSV63x 3 TSV63xA Vio Offset voltage 0.8 TSV633AIST (MiniSO10) 1 Tmin < Top < Tmax - TSV63x 4.5 2 Tmin < Top < Tmax - TSV63xA 2.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Electrical characteristics Table 7: Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance TSV63x 3 0.8 TSV63xA Vio Offset voltages TSV633AIST ( MiniSO10) 1 Tmin < Top < Tmax - TSV63x 4.5 2 Tmin < Top < Tmax - TSV63xA 2.
Electrical characteristics Symbol TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Parameter Conditions Min. Typ. Gm Gain margin RL = 2 kΩ, CL = 100 pF SR Slew rate RL = 2 kΩ, CL = 100 pF, Av =1 en Equivalent input noise voltage f = 1 kHz 60 f = 10 kHz 33 Total harmonic distortion + noise VCC = 5V, f = 1 kHz, Av = 1, RL = 100 kΩ, Vicm = VCC/2, Vout = 2Vpp THD+en 0.25 Max. Unit 13 dB 0.34 V/μs nV/√Hz 0.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Electrical characteristics Figure 2: Supply current vs. supply voltage at Vicm = VCC/2 Figure 3: Output current vs. output voltage at VCC = 1.5 V Figure 4: Output current vs. output voltage at VCC = 5 V Figure 5: Voltage gain and phase vs. frequency at VCC = 1.5 V Ω Figure 6: Voltage gain and phase vs. frequency at VCC = 5 V Figure 7: Phase margin vs.
Electrical characteristics TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Figure 8: Positive slew rate vs. time Figure 9: Negative slew rate vs. time Figure 10: Positive slew rate vs. supply voltage Figure 11: Negative slew rate vs. supply voltage Figure 12: Distortion + noise vs. output voltage Figure 13: Distortion + noise vs. frequency 1 Vcc = 1.5 V Rl = 100 kΩ Vcc = 1.5 V Rl = 2 kΩ Vcc = 1.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Electrical characteristics Figure 15: EMIRR vs. frequency at VCC = 5 V, T = 25 °C 120 300 Vcc=5V Tamb=25°C 250 200 100 E MIR RVpeak (dB ) E quivalent Input Volt age Noise (nV/VHz) Figure 14: Noise vs. frequency Vicm=2.5V 150 100 80 60 40 Vicm=4.
Application information TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 4 Application information 4.1 Operating voltages The TSV63x and TSV63xA can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8 V, 3.3 V, and 5 V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV63x and TSV63xA characteristics at 1.5 V.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 4.4 Application information Shutdown function (TSV633, TSV635) The operational amplifiers are enabled when the SHDN pin is pulled high. To disable the amplifiers, the SHDN must be pulled down to VCC-. When in shutdown mode, the amplifiers’ output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC+ or VCC-. The turn-on and turn-off times are calculated for an output variation of ±200 mV.
Application information 4.5 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Optimization of DC and AC parameters These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR, and Avd, benefit from this narrow dispersion.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 4.8 Application information Macromodel Two accurate macromodels (with or without the shutdown feature) of the TSV63x and TSV63xA are available on STMicroelectronics’ web site at www.st.com. These models are a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x and TSV63xA operational amplifiers.
Package information 5 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Package information In order to meet environmental requirements, ST offers these devices in different grades of ® ® ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ® ECOPACK is an ST trademark.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 5.1 Package information DFN8 2 x 2 (NB) package information Figure 23: DFN8 2 x 2 mm (NB) package outline Table 9: DFN8 2 x 2 x 0.6 mm (NB) package mechanical data (pitch 0.5 mm) Dimensions Ref. A Millimeters Inches Min. Typ. Max. Min. Typ. Max. 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 A3 0.002 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.
Package information TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Figure 24: DFN8 2 x 2 mm (NB) recommended footprint 20/31 DocID15688 Rev 6
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 5.2 Package information SOT23-8 package information Figure 25: SOT23-8 package outline SIDE VIEW Dimensions in mm A A2 Gauge plane A1 L 0.1 C coplanar leads D e1 C e 0.25 e/2 Seating plane E/2 E1/2 E E1 c b (8x leads) TOP VIEW projection Table 10: SOT23-8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.45 A1 Max. 0.057 0.15 0.006 A2 0.90 1.30 0.035 0.051 b 0.
Package information 5.3 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A MiniSO8 package information Figure 26: MiniSO8 package outline Table 11: MiniSO8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.1 A1 0 A2 0.75 b Max. 0.043 0.15 0 0.95 0.030 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.11 0.118 0.122 e L 0.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 5.4 Package information MiniSO10 package information Figure 27: MiniSO10 package outline Table 12: MiniSO-10 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.10 Max. 0.043 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.78 0.86 0.94 0.031 0.034 0.037 b 0.25 0.33 0.40 0.010 0.013 0.016 c 0.15 0.23 0.30 0.006 0.009 0.012 D 2.90 3.00 3.10 0.114 0.118 0.122 E 4.
Package information 5.5 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A SO8 package information Figure 28: SO8 package outline Table 13: SO8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.75 0.25 Max. 0.069 A1 0.10 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 0.004 0.010 0.049 1.27 0.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 5.
Package information TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Table 14: QFN16 3x3 mm package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.80 0.90 1.00 0.031 0.035 0.039 A1 0 0.05 0 A3 0.20 b 0.18 D 2.90 D2 1.50 E 2.90 E2 1.50 e L 3.00 3.00 0.30 0.007 3.10 0.114 1.80 0.059 3.10 0.114 1.80 0.059 0.50 0.30 0.002 0.008 0.012 0.118 0.071 0.118 0.122 0.071 0.020 0.50 0.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 5.7 Package information TSSOP14 package information Figure 31: TSSOP14 package outline Table 15: TSSOP14 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.
Package information 5.8 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A TSSOP16 package information Figure 32: TSSOP16 package outline Table 16: TSSOP16 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b 0.19 1.00 Max. 0.047 0.15 0.002 1.05 0.031 0.30 0.007 0.006 0.039 0.041 0.012 c 0.09 0.20 0.004 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A 6 Ordering information Ordering information Table 17: Order codes Order code Temperature range Package (1) Marking TSV632AIDT SO8 TV632A TSV632AILT SOT23-8 K145 TSV632AIQ2T DFN8 2x2 K1P MiniSO8 K145 SΟ8 TSV632 TSV632ILT SOT23-8 K110 TSV632IQ2T DFN8 2x2 K1N MiniSO8 K110 SΟ8 V632IY TSV632AIST TSV632IDT -40 °C to 125 °C TSV632IST TSV632IYDT -40 °C to 125 °C, (2) automotive grade TSV633AIST MiniSO10 TSV633IST
Revision history 7 TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Revision history Table 18: Document revision history Date Revision 25-May-2009 1 Initial release. 15-Jun-2009 2 Corrected pin connection diagram in Figure 1. 03-Sep-2009 3 Added root part numbers (TSV63xA) and Table 1: "Device summary" on cover page. Added order code TSV632AILT in Table 17: "Order codes". 4 Added DFN8 2x2 package mechanical drawing.
TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders.