Datasheet

TS982 Absolute maximum ratings and operating conditions
Doc ID 9557 Rev 7 3/21
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values are measured with respect to the ground pin.
6V
V
in
Input voltage -0.3 V to V
CC
+0.3 V V
T
oper
Operating free-air temperature range -40 to + 125 °C
T
stg
Storage temperature -65 to +150 °C
T
j
Maximum junction temperature 150 °C
R
thja
Thermal resistance junction to ambient
(2)
2. With two sides, two-plane PCB following the EIA/JEDEC JESD51-7 standard.
45 °C/W
R
thjc
Thermal resistance junction to case 10 °C/W
ESD
Human body model (HBM)
(3)
3. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
2kV
Charged device model (CDM)
(4)
4. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
1.5 kV
Machine model (MM)
(5)
5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
200 V
Latch-up Latch-up immunity (all pins) 200 mA
Lead temperature (soldering, 10 sec.) 250 °C
Output short-circuit duration See note
(6)
6. Short-circuits can cause excessive heating. Destructive dissipation can result from a short-circuit on one or
two amplifiers simultaneously.
Table 2. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage 2.5 to 5.5 V
V
icm
Common mode input voltage range GND to V
CC
V
C
L
Load capacitor
R
L
< 100 Ω
R
L
> 100 Ω
400
100
pF