Datasheet

DocID6031 Rev 9 3/17
TS971, TS972, TS974 Absolute maximum ratings and operating conditions
17
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage are with respect to network ground terminal.
12
VV
id
Differential input voltage
(2)
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
±1
V
in
Input voltage
(3)
3. The magnitude of input and output voltages must never exceed V
CC
+0.3 V.
V
DD
-0.3 to V
CC
+0.3
T
stg
Storage temperature range -65 to +150
°C
T
j
Maximum junction temperature 150
R
thja
Thermal resistance junction-to-ambient
(4)
SOT23-5
SO8
TSSOP8
DFN8 3x3
SO14
TSSOP14
4. Short-circuits can cause excessive heating and destructive dissipation. Values are typical.
250
125
120
40
105
100
°C/W
R
thjc
Thermal resistance junction-to-case
(4)
SOT23-5
SO8
TSSOP8
DFN8 3x3
SO14
TSSOP14
81
40
37
5.2
31
32
ESD
HBM: human body model
(5)
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
2kV
MM: machine model
(6)
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
200 V
CDM: charged device model
(7)
7. Charged device model: all pins and package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
No value specified for CDM on SOT23-5 package.
1.5 kV
Lead temperature (soldering, 10 sec.) 260 °C