Datasheet

DocID5561 Rev 10 3/17
TS951, TS952, TS954 Absolute maximum ratings and operating conditions
17
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage are with respect to network ground terminal.
14
VV
id
Differential input voltage
(2)
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
If V
id
> ±1 V, the maximum input current must not exceed ±1 mA. In this case (V
id
> ±1 V), an input series
resistor must be added to limit input current.
±1
V
in
Input voltage
(3)
3. Do not exceed 14 V.
V
DD
-0.3 to V
CC
+0.3
T
stg
Storage temperature range -65 to +150
°C
T
j
Maximum junction temperature 150
R
thja
Thermal resistance junction-to-ambient
(4)
SOT23-5
SO8
TSSOP8
SO14
TSSOP14
4. Short-circuits can cause excessive heating and destructive dissipation. R
th
are typical values.
250
125
120
103
100
°C/W
R
thjc
Thermal resistance junction-to-case
(4)
SOT23-5
SO-8
TSSOP8
SO14
TSSOP14
81
40
37
31
32
ESD
HBM: human body model
(5)
TS951
TS952
TS954
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
1
2
3
kV
MM: machine model
(6)
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω ). This is done for all couples of
connected pin combinations while the other pins are floating.
100 V
CDM: charged device model
(7)
TS951
TS952
TS954
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
1.5
1.5
1
kV
Latch-up immunity 200 mA
Lead temperature (soldering, 10 sec.) 260 °C