Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOT 23 5

This is information on a product in full production.

July 2013 DocID15707 Rev 6 1/11

TS9511

Precision rail-to-rail input/output 3 MHz single operational amplifier

Datasheet - production data

Features

• Good precision: 800 µV max.

• Rail-to-rail input and output

• Wide supply voltage range: 2.7 V to 12 V

• High-speed (3 MHz, 1 V/µs)

• Low consumption (900 µA at 3 V)

• Supply voltage rejection ratio: 85 dB

• Micropackage: SOT23-5

Applications

• Signal conditioning

• Automotive applications

• Laptop/notebook computers

• Transformer/line drivers

• Personal entertainment (CD players)

• Portable communication (cell phones, pagers)

• Digital-to-analog converter buffers

• Portable headphone speaker drivers

Description

The TS9511 device is a single, precision

rail-to-rail operational amplifier whose supply

voltage range extends from 2.7 V to 12 V.

Its high-precision performance associated with

an SOT23-5 package make it suitable for a wide

range of demanding applications, such as

industrial, automotive, consumer, and computer

applications.

2XW 









&&

,1

&&

,1

2XW 









&&

,1

&&

,1

TS9511ILT/TS9511IYLT

TS9511RILT/TS9511RIYLT

www.st.com

Summary of content (11 pages)

PAGE 1
TS9511 Precision rail-to-rail input/output 3 MHz single operational amplifier Datasheet - production data Applications TS9511ILT/TS9511IYLT • Signal conditioning • Automotive applications 2XW 9&& • Laptop/notebook computers 9&& • Transformer/line drivers • Personal entertainment (CD players) • Portable communication (cell phones, pagers) ,1 • Digital-to-analog converter buffers ,1 • Portable headphone speaker drivers Description TS9511RILT/TS9511RIYLT 2XW The TS9511 device is
PAGE 2
Contents TS9511 Contents 1 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.1 SOT23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
TS9511 1 Absolute maximum ratings and operating conditions Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value VCC Supply voltage(1) 14 Vid Differential input voltage(2) ±1 Vin Input voltage(3) Tstg Storage temperature range Unit V VDD-0.3 to VCC+0.
PAGE 4
Electrical characteristics 2 TS9511 Electrical characteristics Table 3. Electrical characteristics at VCC = +3 V, VDD = 0 V , Vicm = VCC/2, RL connected to VCC/2, Tamb = 25 °C (unless otherwise specified) Symbol Vio Parameter Min. Input offset voltage Tmin ≤ Tamb ≤ Tmax ΔVio/ΔT Input offset voltage drift Max.
PAGE 5
TS9511 Electrical characteristics Table 4. Electrical characteristics at VCC = +5 V, VDD = 0 V, Vicm = VCC/2, RL connected to VCC/2, Tamb = 25 °C (unless otherwise specified) Symbol Vio ΔVio/ΔT Iio Iib Parameter Min. Typ.
PAGE 6
Electrical characteristics TS9511 Figure 1. Supply current vs. supply voltage Figure 2. Supply current vs. temperature Figure 3. Output short-circuit current vs. output voltage Figure 4. Output short-circuit current vs. temperature Figure 5. Voltage gain and phase vs. frequency, Figure 6. Voltage gain and phase vs.
PAGE 7
TS9511 Electrical characteristics Figure 7. Slew rate vs. temperature Figure 8. THD + noise vs. Vout, RL = 600 Ω Figure 9. THD + noise vs. Vout, RL = 2 kΩ Figure 10. THD + noise vs. frequency Figure 11. Equivalent input noise voltage vs.
PAGE 8
Package information 3 TS9511 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
PAGE 9
TS9511 3.1 Package information SOT23-5 package information Figure 12. SOT23-5 package outline Table 5. SOT23-5 package mechanical data Dimensions Symbol A Millimeters Inches Min. Typ. Max. Min. Typ. Max. 0.90 1.20 1.45 0.035 0.047 0.057 A1 0.15 0.006 A2 0.90 1.05 1.30 0.035 0.041 0.051 B 0.35 0.40 0.50 0.013 0.015 0.019 C 0.09 0.15 0.20 0.003 0.006 0.008 D 2.80 2.90 3.00 0.110 0.114 0.118 D1 1.90 0.075 e 0.95 0.037 E 2.60 2.80 3.00 0.102 0.
PAGE 10
Ordering information TS9511 4 Ordering information Table 6. Order codes Order code Temperature range Package TS9511ILT Packing Marking K1A1 SOT23-5L TS9511RILT TS9511IYLT(1) K1A3 -40 °C to +125 °C Tape and reel SOT23-5L (automotive grade) TS9511RIYLT(1) K1A2 K1A4 1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q 002 or equivalent. 5 Revision history Table 7.
PAGE 11
TS9511 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.