Datasheet

Absolute maximum ratings and operating conditions TS94x, TS94xA, TS94xB
2/18 Doc ID 6972 Rev 6
1 Absolute maximum ratings and operating conditions
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage are with respect to network terminal.
12 V
V
id
Differential input voltage
(2)
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
± V
CC
V
V
in
Input voltage range
(3)
3. The magnitude of input and output voltages must never exceed V
CC
+0.3 V.
V
DD
-0.3 to V
CC
+0.3 V
T
stg
Storage temperature range -65 to +150 °C
T
j
Maximum junction temperature 150 °C
R
thja
Thermal resistance junction to ambient
(4)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
4. Short-circuits can cause excessive heating and destructive dissipation. R
th
are typical values.
250
125
103
120
100
°C/W
R
thjc
Thermal resistance junction to case
(4)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
81
40
31
37
32
°C/W
ESD
HBM: human body model
(5)
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
2kV
MM: machine model
(6)
(TS941, TS942)
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
200 V
CDM: charged device model
(7)
TS941 - TS944IDT
TS942 - TS944IPT
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
1.5
1
kV
Latch-up immunity 200 mA
Lead temperature (soldering, 10sec) 250 °C