Datasheet

Absolute maximum ratings and operating conditions TS93x, TS93xA, TS93xB
2/17 Doc ID 6911 Rev 5
1 Absolute maximum ratings and operating conditions
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltages values, except differential voltage are with respect to network terminal.
12 V
V
id
Differential input voltage
(2)
2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal.
±V
CC
V
V
in
Input voltage range
(3)
3. The magnitude of input and output voltages must never exceed V
CC+
+0.3 V.
V
CC-
-0.3 to V
CC+
+0.3 V
I
in
Input current range
(4)
4. Input current must be limited by a resistor in series with the inputs.
10 mA
T
std
Storage temperature range -65 to +150 °C
T
j
Maximum junction temperature 150 °C
R
thja
Thermal resistance junction-to-ambient
(5)
– SOT23-5
–SO8
–SO14
– TSSOP14
5. Short-circuits can cause excessive heating and destructive dissipation.
250
125
103
100
°C/W
ESD
HBM: human body model
(6)
6. Human body model: 100 pF discharged through a 1.5 kΩ resistor into pin of device.
2kV
MM: machine model
(7)
7. Machine model ESD: a 200 pF capacitor is charged to the specified voltage, then discharged directly into
the IC with no external series resistor (internal resistor < 5 Ω), into pin-to-pin of device.
200 V
CDM: charged device model
(8)
8. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
2kV
Latch-up immunity 200 mA
Soldering temperature (10 sec.), leaded version 250 °C
Table 3. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage 2.7 to 10 V
V
icm
Common mode input voltage range V
CC-
-0.2 to V
CC+
-1.5 V
T
oper
Operating free air temperature range -40 to +105 °C