Datasheet

TS921 Absolute maximum ratings
Doc ID 5560 Rev 4 3/16
2 Absolute maximum ratings
Table 2. Key parameters and their absolute maximum ratings
Symbol Parameter Condition Value Unit
V
CC
Supply voltage
(1)
14 V
V
id
Differential input voltage
(2)
±1 V
V
i
Input voltage V
DD
- 0.3 to V
CC
+ 0.3 V
T
stg
Storage temperature -65 to +150 °C
T
j
Maximum junction temperature 150 °C
R
thja
Thermal resistance junction-to-ambient
SO-8
TSSOP8
DIP8
125
120
85
°C/W
R
thjc
Thermal resistance junction-to-case
SO-8
TSSOP8
DIP8
40
37
41
°C/W
ESD Electrostatic discharge
HBM
Human body model
(3)
1.5 kV
MM
Machine model
(4)
100 V
CDM
Charged device model
1.5 kV
Output short-circuit duration See
(5)
Latch-up immunity 200 mA
Soldering temperature
10 sec.,
standard package
250 °C
10 sec.,
lead-free package
260
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If V
id
> ±1 V, the
maximum input current must not exceed ±1 mA. In this case (V
id
> ±1 V) an input serie resistor must be added to limit input
current.
3. Human body model, 100 pF discharged through a 1.5 kΩ resistor into pin of device.
4. Machine model ESD, a 200 pF cap is charged to the specified voltage, then discharged directly into the IC with no external
series resistor (internal resistor < 5 Ω), into pin to pin of device.
5. There is no short-circuit protection inside the device: short-circuits from the output to V
CC
can cause excessive heating. The
maximum output current is approximately 80 mA, independent of the magnitude of V
CC
. Destructive dissipation can result
from simultaneous short-circuits on all amplifiers.
Table 3. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage 2.7 to 12 V
V
icm
Common mode input voltage range V
DD
- 0.2 to V
CC
+ 0.2 V
T
oper
Operating free air temperature range -40 to +125 °C