Datasheet

Absolute maximum ratings and operating conditions TS914, TS914A
2/17 Doc ID 4475 Rev 8
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage are with respect to network ground terminal.
18 V
V
id
Differential input voltage
(2)
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
±18 V
V
in
Input voltage
(3)
3. The magnitude of input and output voltages must never exceed V
CC
+
+0.3 V.
-0.3 to 18 V
I
in
Current on inputs ±50 mA
I
o
Current on outputs ±130 mA
T
j
Maximum junction temperature 150 °C
T
stg
Storage temperature -65 to +150 °C
R
thja
Thermal resistance junction to ambient
(4)
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuit on all amplifiers. These are typical values.
103 °C/W
R
thjc
Thermal resistance junction to case 31 °C/W
ESD
HBM: human body model
(5)
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
1kV
MM: machine model
(6)
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
50 V
CDM: charged device model
(7)
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
1.5 kV
Table 2. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage 2.7 to 16 V
V
icm
Common mode input voltage range V
CC-
-0.2 to V
CC+
+0.2 V
T
oper
Operating free air temperature range -40 to + 125 °C