Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Schematic diagram
- 3 Electrical characteristics
- Table 3. VCC+ = 3 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 4. VCC+ = 5 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 5. VCC+ = 10 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Figure 2. Supply current (each amplifier) vs. supply voltage
- Figure 3. High level output voltage vs. high level output current (VCC = +5 V, VCC = +3 V)
- Figure 4. Low level output voltage vs. low level output current (VCC = +3 V, VCC = +5 V)
- Figure 5. Input bias current vs. temperature
- Figure 6. High level output voltage vs. high level output current (VCC = +16 V, VCC = +10 V)
- Figure 7. Low level output voltage vs. low level output current (VCC = 16 V, VCC = 10 V)
- Figure 8. Gain and phase vs. frequency (RL = 10 kW)
- Figure 9. Gain bandwidth product vs. supply voltage (RL = 10 kW)
- Figure 10. Phase margin vs. supply voltage (RL = 10 kW)
- Figure 11. Gain and phase vs. frequency (RL = 600 W)
- Figure 12. Gain bandwidth product vs. supply voltage (RL = 600 W)
- Figure 13. Phase margin vs. supply voltage (RL = 600 W)
- Figure 14. Input voltage noise vs. frequency
- 4 Macromodel
- 5 Package information
- 6 Ordering information
- 7 Revision history
Electrical characteristics TS912, TS912A, TS912B
6/21 Doc ID 2325 Rev 7
SR
+
Slew rate (A
VCL
= 1, R
L
= 10 kΩ, C
L
= 100 pF, V
i
= 1.3 V to 1.7 V) 0.4 V/μs
SR
-
Slew rate (A
VCL
= 1, R
L
= 10 kΩ, C
L
= 100 pF, V
i
= 1.3 V to 1.7 V) 0.3 V/μs
φm Phase margin 30 Degrees
en Equivalent input noise voltage (R
s
= 100 Ω, f = 1 kHz) 30 nV/√Hz
1. Maximum values include unavoidable inaccuracies of the industrial tests.
Table 3. V
CC+
= 3 V, V
CC-
= 0 V, R
L
, C
L
connected to V
CC
/2, T
amb
= 25 °C
(unless otherwise specified) (continued)
Symbol Parameter Min. Typ. Max. Unit