Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Schematic diagram
- 3 Electrical characteristics
- Table 3. VCC+ = 3 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 4. VCC+ = 5 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 5. VCC+ = 10 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Figure 2. Supply current (each amplifier) vs. supply voltage
- Figure 3. High level output voltage vs. high level output current (VCC = +5 V, VCC = +3 V)
- Figure 4. Low level output voltage vs. low level output current (VCC = +3 V, VCC = +5 V)
- Figure 5. Input bias current vs. temperature
- Figure 6. High level output voltage vs. high level output current (VCC = +16 V, VCC = +10 V)
- Figure 7. Low level output voltage vs. low level output current (VCC = 16 V, VCC = 10 V)
- Figure 8. Gain and phase vs. frequency (RL = 10 kW)
- Figure 9. Gain bandwidth product vs. supply voltage (RL = 10 kW)
- Figure 10. Phase margin vs. supply voltage (RL = 10 kW)
- Figure 11. Gain and phase vs. frequency (RL = 600 W)
- Figure 12. Gain bandwidth product vs. supply voltage (RL = 600 W)
- Figure 13. Phase margin vs. supply voltage (RL = 600 W)
- Figure 14. Input voltage noise vs. frequency
- 4 Macromodel
- 5 Package information
- 6 Ordering information
- 7 Revision history
Revision history TS912, TS912A, TS912B
20/21 Doc ID 2325 Rev 7
7 Revision history
Table 9. Document revision history
Date Revision Changes
04-Dec-2001 1 First release.
31-Jul-2005 2
PPAP references inserted in the datasheet, see order codes table.
ESD protection inserted in AMR table.
03-Oct-2005 3
Some errors in the Order Codes table were corrected.
Reorganization of Section 4: Macromodel.
13-Feb- 2006 4
Parameters added in AMR table (T
j
, ESD, R
thja
, R
thjc
).
16-Oct-2007 5
Corrected units and ESD footnotes in Table 1: Absolute maximum
ratings.
Corrected misalignments in electrical characteristics table.
Updated Section 4: Macromodel.
Added missing automotive grade order codes and footnote in
Table 8: Order codes.
Format update.
01-Feb-2010 6
Added TS912A and TS912B part numbers on cover page.
06-Nov-2012 7
Updated Features (added Related products).
Updated Figure 3, Figure 4, Figure 6 to Figure 13 (added conditions
to differentiate them).
Removed TS912IYD, TS912AIYD, and TS912BIYD device from
Ta bl e 8 .
Minor corrections throughout document.