Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Schematic diagram
- 3 Electrical characteristics
- Table 3. VCC+ = 3 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 4. VCC+ = 5 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 5. VCC+ = 10 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Figure 2. Supply current (each amplifier) vs. supply voltage
- Figure 3. High level output voltage vs. high level output current (VCC = +5 V, VCC = +3 V)
- Figure 4. Low level output voltage vs. low level output current (VCC = +3 V, VCC = +5 V)
- Figure 5. Input bias current vs. temperature
- Figure 6. High level output voltage vs. high level output current (VCC = +16 V, VCC = +10 V)
- Figure 7. Low level output voltage vs. low level output current (VCC = 16 V, VCC = 10 V)
- Figure 8. Gain and phase vs. frequency (RL = 10 kW)
- Figure 9. Gain bandwidth product vs. supply voltage (RL = 10 kW)
- Figure 10. Phase margin vs. supply voltage (RL = 10 kW)
- Figure 11. Gain and phase vs. frequency (RL = 600 W)
- Figure 12. Gain bandwidth product vs. supply voltage (RL = 600 W)
- Figure 13. Phase margin vs. supply voltage (RL = 600 W)
- Figure 14. Input voltage noise vs. frequency
- 4 Macromodel
- 5 Package information
- 6 Ordering information
- 7 Revision history
TS912, TS912A, TS912B Ordering information
Doc ID 2325 Rev 7 19/21
6 Ordering information
Table 8. Order codes
Part number
Temperature
range
Package Packing Marking
TS912IN
-40 °C, +125 °C
DIP8 Tube
TS912IN
TS912AIN TS912AIN
TS912ID
TS912IDT
SO-8
Tube or
tape and reel
912I
TS912AID
TS912AIDT
912AI
TS912BID
TS912BIDT
912BI
TS912IYDT
(1)
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 and Q 002 or equivalent.
SO-8
(automotive grade level)
912IY
TS912AIYDT
(1)
912AIY
TS912BIYDT
(1)
912BY