Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Schematic diagram
- 3 Electrical characteristics
- Table 3. VCC+ = 3 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 4. VCC+ = 5 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 5. VCC+ = 10 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Figure 2. Supply current (each amplifier) vs. supply voltage
- Figure 3. High level output voltage vs. high level output current (VCC = +5 V, VCC = +3 V)
- Figure 4. Low level output voltage vs. low level output current (VCC = +3 V, VCC = +5 V)
- Figure 5. Input bias current vs. temperature
- Figure 6. High level output voltage vs. high level output current (VCC = +16 V, VCC = +10 V)
- Figure 7. Low level output voltage vs. low level output current (VCC = 16 V, VCC = 10 V)
- Figure 8. Gain and phase vs. frequency (RL = 10 kW)
- Figure 9. Gain bandwidth product vs. supply voltage (RL = 10 kW)
- Figure 10. Phase margin vs. supply voltage (RL = 10 kW)
- Figure 11. Gain and phase vs. frequency (RL = 600 W)
- Figure 12. Gain bandwidth product vs. supply voltage (RL = 600 W)
- Figure 13. Phase margin vs. supply voltage (RL = 600 W)
- Figure 14. Input voltage noise vs. frequency
- 4 Macromodel
- 5 Package information
- 6 Ordering information
- 7 Revision history
Package information TS912, TS912A, TS912B
18/21 Doc ID 2325 Rev 7
5.2 SO-8 package information
Figure 16. SO-8 package outline
Table 7. SO-8 package mechanical data
Symbol
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.75 0.069
A1 0.10 0.25 0.004 0.010
A2 1.25 0.049
b 0.28 0.48 0.011 0.019
c 0.17 0.23 0.007 0.010
D 4.80 4.90 5.00 0.189 0.193 0.197
E 5.80 6.00 6.20 0.228 0.236 0.244
E1 3.80 3.90 4.00 0.150 0.154 0.157
e 1.27 0.050
h 0.25 0.50 0.010 0.020
L 0.40 1.27 0.016 0.050
L1 1.04 0.040
k 0 8° 1° 8°
ccc 0.10 0.004