Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Schematic diagram
- 3 Electrical characteristics
- Table 3. VCC+ = 3 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 4. VCC+ = 5 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 5. VCC+ = 10 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Figure 2. Supply current (each amplifier) vs. supply voltage
- Figure 3. High level output voltage vs. high level output current (VCC = +5 V, VCC = +3 V)
- Figure 4. Low level output voltage vs. low level output current (VCC = +3 V, VCC = +5 V)
- Figure 5. Input bias current vs. temperature
- Figure 6. High level output voltage vs. high level output current (VCC = +16 V, VCC = +10 V)
- Figure 7. Low level output voltage vs. low level output current (VCC = 16 V, VCC = 10 V)
- Figure 8. Gain and phase vs. frequency (RL = 10 kW)
- Figure 9. Gain bandwidth product vs. supply voltage (RL = 10 kW)
- Figure 10. Phase margin vs. supply voltage (RL = 10 kW)
- Figure 11. Gain and phase vs. frequency (RL = 600 W)
- Figure 12. Gain bandwidth product vs. supply voltage (RL = 600 W)
- Figure 13. Phase margin vs. supply voltage (RL = 600 W)
- Figure 14. Input voltage noise vs. frequency
- 4 Macromodel
- 5 Package information
- 6 Ordering information
- 7 Revision history
TS912, TS912A, TS912B Package information
Doc ID 2325 Rev 7 17/21
5.1 DIP8 package information
Figure 15. DIP8 package outline
Table 6. DIP8 package mechanical data
Symbol
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 5.33 0.210
A1 0.38 0.015
A2 2.92 3.30 4.95 0.115 0.130 0.195
b 0.36 0.46 0.56 0.014 0.018 0.022
b2 1.14 1.52 1.78 0.045 0.060 0.070
c 0.20 0.25 0.36 0.008 0.010 0.014
D 9.02 9.27 10.16 0.355 0.365 0.400
E 7.62 7.87 8.26 0.300 0.310 0.325
E1 6.10 6.35 7.11 0.240 0.250 0.280
e 2.54 0.100
eA 7.62 0.300
eB 10.92 0.430
L 2.92 3.30 3.81 0.115 0.130 0.150