Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Schematic diagram
- 3 Electrical characteristics
- Table 3. VCC+ = 3 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 4. VCC+ = 5 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Table 5. VCC+ = 10 V, VCC- = 0 V, RL, CL connected to VCC/2, Tamb = 25 C (unless otherwise specified)
- Figure 2. Supply current (each amplifier) vs. supply voltage
- Figure 3. High level output voltage vs. high level output current (VCC = +5 V, VCC = +3 V)
- Figure 4. Low level output voltage vs. low level output current (VCC = +3 V, VCC = +5 V)
- Figure 5. Input bias current vs. temperature
- Figure 6. High level output voltage vs. high level output current (VCC = +16 V, VCC = +10 V)
- Figure 7. Low level output voltage vs. low level output current (VCC = 16 V, VCC = 10 V)
- Figure 8. Gain and phase vs. frequency (RL = 10 kW)
- Figure 9. Gain bandwidth product vs. supply voltage (RL = 10 kW)
- Figure 10. Phase margin vs. supply voltage (RL = 10 kW)
- Figure 11. Gain and phase vs. frequency (RL = 600 W)
- Figure 12. Gain bandwidth product vs. supply voltage (RL = 600 W)
- Figure 13. Phase margin vs. supply voltage (RL = 600 W)
- Figure 14. Input voltage noise vs. frequency
- 4 Macromodel
- 5 Package information
- 6 Ordering information
- 7 Revision history
Package information TS912, TS912A, TS912B
16/21 Doc ID 2325 Rev 7
5 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.