Datasheet

DocID024119 Rev 2 21/26
TS882, TS884 Package information
4.4 SO14 package information
Figure 39. SO14 package outline
Table 9. SO14 package mechanical data
Dimensions
(1)
1. Drawing dimensions include “Single” and “Matrix” versions.
Symbol
Millimeters Inches
Note
Min. Typ. Max. Min. Typ. Max.
A 1.35 1.75 0.05 0.068
A1 0.10 0.25 0.004 0.009
A2 1.10 1.65 0.04 0.06
B 0.33 0.51 0.01 0.02
C 0.19 0.25 0.007 0.009
D 8.55 8.75 0.33 0.34
(2)
2. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold flash, protrusions or gate burrs
shall not exceed 0.15 mm per side.
E 3.80 4.0 0.15 0.15
e 1.27 0.05
H 5.80 6.20 0.22 0.24
L 0.40 1.27 0.015 0.05
k 0° 8° 0° 8°
ddd 0.10 0.004