Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SO 14

This is information on a product in full production.

September 2012 Doc ID 5050 Rev 5 1/16

TS514

Precision quad operational amplifier

Datasheet − production data

Features

■ Low input offset voltage: 500 μV max.

■ Low power consumption

■ Short-circuit protection

■ Low distortion, low noise

■ High gain bandwidth product

■ High channel separation

■ ESD protection 2 kV

Description

The TS514 device is a high-performance quad

operational amplifier with frequency and phase

compensation built into the chip. The internal

phase compensation allows stable operation as

a voltage follower in spite of its high gain

bandwidth.

The circuit presents very stable electrical

characteristics over the entire supply voltage

range, and is particularly intended for professional

and telecom applications (such as active filters,

for example).

DIP14

(plastic package)

SO-14

(plastic micropackage)

Pin connections

(top view)

www.st.com

Summary of content (16 pages)

PAGE 1
TS514 Precision quad operational amplifier Datasheet − production data Features ■ Low input offset voltage: 500 μV max. ■ Low power consumption ■ Short-circuit protection ■ Low distortion, low noise ■ High gain bandwidth product ■ High channel separation ■ ESD protection 2 kV N DIP14 (plastic package) Description The TS514 device is a high-performance quad operational amplifier with frequency and phase compensation built into the chip.
PAGE 2
Absolute maximum ratings and operating conditions 1 TS514 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol VCC Vi Parameter Value Unit ±18 V VDD-0.2 to VCC+0.2 V ±VCC V -65 to +150 °C 103 80 °C/W 31 33 °C/W 2 kV MM: machine model(3) 200 V CDM: charged device model(4) 1.
PAGE 3
TS514 Schematic diagram 2 Schematic diagram Figure 1.
PAGE 4
Electrical characteristics 3 TS514 Electrical characteristics Table 3. Electrical characteristics at VCC = ±15 V, Tamb = 25 °C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit 0.5 0.6 0.75 mA 150 300 ICC Supply current (per operator) at Tmin ≤ Top ≤ Tmax Iib Input bias current – at 25 °C – at Tmin ≤ Top ≤ Tmax 50 Ri Input resistance, F= 1 kHz 1 Vio Input offset voltage – at 25 °C TS514 TS514A – at Tmin ≤ Top ≤ Tmax TS514 TS514A ΔVio 0.5 nA MΩ 2.5 0.5 mV 4 1.
PAGE 5
TS514 Electrical characteristics Table 3. Symbol Electrical characteristics at VCC = ±15 V, Tamb = 25 °C (unless otherwise specified) (continued) Parameter Min. Typ. Max.
PAGE 6
Electrical characteristics Figure 2. TS514 Vio distribution at VCC = ±15 V and T = 25 °C Figure 3. Vio distribution at VCC = ±15 V and T = 125 °C Figure 4. Input offset voltage vs. supply voltage at Vicm = VCC/2 Figure 5. Input offset voltage vs. input common mode voltage at VCC = 6 V Figure 6. Input offset voltage vs. input Figure 7. common mode voltage at VCC = 10 V Input offset voltage vs.
PAGE 7
TS514 Figure 8. Electrical characteristics Supply current (per operator) vs. supply voltage at Vicm = VCC/2 Figure 9. Supply current (per operator) vs. input common mode voltage at VCC = 6 V Figure 10. Supply current (per operator) vs. input common mode voltage at VCC = 10 V Figure 11. Supply current (per operator) vs. input common mode voltage at VCC = 30 V Figure 12. Output current vs. supply voltage at Vicm = VCC/2 Figure 13. Output current vs.
PAGE 8
Electrical characteristics TS514 Figure 14. Output current vs. output voltage at VCC = 10 V Figure 15. Output current vs. output voltage at VCC = 30 V Figure 16. Voltage gain and phase for different Figure 17. Voltage gain and phase for different capacitive load at VCC = 6 V, capacitive load at VCC = 10 V, Vicm = 3 V and T = 25 °C Vicm = 5 V and T = 25 °C Figure 18. Voltage gain and phase for different Figure 19.
PAGE 9
TS514 Electrical characteristics Figure 20. Frequency response for different capacitive load at VCC= 10 V, Vicm = 5 V and T = 25 °C Figure 21. Frequency response for different capacitive load at VCC = 30 V, Vicm = 15 V and T = 25 °C Figure 22. Gain margin vs. output current, Figure 23. Gain margin vs. output current, at at VCC = 6 V, Vicm = 3 V and T = 25 °C VCC = 10 V, Vicm = 5 V and T = 25 °C Figure 24. Gain margin vs. output current, at Figure 25. Phase margin vs.
PAGE 10
Electrical characteristics TS514 Figure 26. Phase margin vs. output current, at Figure 27. Phase margin vs.
PAGE 11
TS514 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
PAGE 12
Package information 4.1 TS514 DIP14 package information Figure 28. DIP14 package outline Table 4. DIP14 package mechanical data Dimensions Symbol Millimeters Min. Typ. A Min. Typ. Max. 0.21 A1 0.38 A2 2.92 3.30 4.95 0.11 0.13 0.19 b 0.36 0.46 0.56 0.014 0.018 0.022 b2 1.14 1.52 1.78 0.04 0.06 0.07 c 0.20 0.25 0.36 0.007 0.009 0.01 D 18.67 19.05 19.69 0.73 0.75 0.77 E 7.62 7.87 8.26 0.30 0.31 0.32 E1 6.10 6.35 7.11 0.24 0.25 0.28 0.015 e 2.
PAGE 13
TS514 4.2 Package information SO-14 package information Figure 29. SO-14 package outline Table 5. SO-14 package mechanical data Dimensions Symbol Millimeters Min. Typ. Inches Max. Min. Max. A 1.35 1.75 0.05 0.068 A1 0.10 0.25 0.004 0.009 A2 1.10 1.65 0.04 0.06 B 0.33 0.51 0.01 0.02 C 0.19 0.25 0.007 0.009 D 8.55 8.75 0.33 0.34 E 3.80 4.0 0.15 0.15 e 1.27 0.05 H 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 L 0.40 1.27 0.015 0.
PAGE 14
Ordering information 5 TS514 Ordering information Table 6.
PAGE 15
TS514 6 Revision history Revision history Table 7. Document revision history Date Revision 09-Mar-2001 1 Initial release. 23-Jun-2005 2 Automotive grade part references inserted in the datasheet (see Chapter 5: Ordering information on page 14). 3 The following changes were made in this revision. – An error in the device description was corrected on page 1. – Chapter 5: Ordering information on page 14 updated with complete list of markings.
PAGE 16
TS514 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.