Datasheet
Table Of Contents
- 1 Absolute maximum ratings and operating conditions
- 2 Electrical characteristics
- Table 3. Electrical characteristics at VCC = +5 V, VDD = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2 (unless otherwise specified)
- Table 4. Electrical characteristics at VCC = +3.3 V, VDD = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2 (unless otherwise specified)
- Table 5. Electrical characteristics at VCC = +2.7 V VDD = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2 (unless otherwise specified)
- Figure 1. Input offset voltage distribution for Vicm£ VCC-1.2 V at T=25 °C
- Figure 2. Input offset voltage distribution vs. temperature for Vicm£ VCC-1.2 V
- Figure 3. Input offset voltage distribution vs. temperature for Vicm ³ VCC-0.8 V
- Figure 4. Input offset voltage distribution for Vicm £ VCC-1.2 V at T=25 °C after HTB
- Figure 5. Input offset voltage distribution for Vicm £ VCC-1.2 V at T=25 °C after THB
- Figure 6. Input offset voltage vs. input common mode voltage at T=25 °C
- Figure 7. Supply current vs. input common mode voltage in closed loop configuration at VCC=5 V
- Figure 8. Supply current vs. supply voltage at Vicm=VCC/2
- Figure 9. Supply current vs. input common mode voltage in follower configuration at VCC=2.7 V
- Figure 10. Supply current vs. input common mode voltage in follower configuration at VCC=5 V
- Figure 11. Output current vs. supply voltage at Vicm=VCC/2
- Figure 12. Output current vs. output voltage at VCC=2.7 V
- Figure 13. Output current vs. output voltage at VCC=5 V
- Figure 14. Positive and negative slew rate vs. supply voltage
- Figure 15. Voltage gain and phase vs. frequency at VCC=5 V and Vicm=2.5 V at T=25 °C
- Figure 16. Voltage gain and phase vs. frequency at VCC=5 V and Vicm=2.5 V at T=-40 °C
- Figure 17. Voltage gain and phase vs. frequency at VCC=5 V and Vicm=2.5 V at T=125 °C
- Figure 18. Closed loop gain in voltage follower configuration for different capacitive load at T=25 °C
- Figure 19. Gain margin according to the output load, at VCC=5 V and T=25 °C
- Figure 20. Phase margin according to the output load, at VCC=5 V and T=25 °C
- Figure 21. Gain margin vs. output current, at VCC=5 V and T=25 °C
- Figure 22. Phase margin vs. output current, at VCC=5 V and T=25 °C
- Figure 23. Phase and gain margins vs capacitive load at = 25 °C
- Figure 24. Distortion + noise vs. output voltage
- Figure 25. Distortion + noise vs. frequency
- Figure 26. Noise vs. frequency
- 3 Application note
- 4 Package information
- 5 Ordering information
- 6 Revision history
Package information TS507
18/20 DocID10958 Rev 6
4.2 SO-8 package
Figure 32. SO-8 package mechanical drawing
Table 8. SO-8 package mechanical data
Ref.
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A1.750.069
A1 0.10 0.25 0.004 0.010
A2 1.25 0.049
b 0.28 0.48 0.011 0.019
c 0.17 0.23 0.007 0.010
D 4.80 4.90 5.00 0.189 0.193 0.197
E 5.80 6.00 6.20 0.228 0.236 0.244
E1 3.80 3.90 4.00 0.150 0.154 0.157
e 1.27 0.050
h 0.25 0.50 0.010 0.020
L 0.40 1.27 0.016 0.050
k1° 8°1° 8°
ccc 0.10 0.004