Datasheet

Absolute maximum ratings TS339
2/11 Doc ID 4065 Rev 3
1 Absolute maximum ratings
Table 2. Key parameters and their absolute maximum ratings
Symbol Parameter Value Unit
V
CC
+
Supply voltage
(1)
1. All voltage values, except differential voltage, are with respect to network ground terminal.
18 V
V
id
Differential input voltage
(2)
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
±18 V
V
i
Input voltage
(3)
3. Excursions of input voltages may exceed the power supply level. As long as the common mode voltage
[V
icm
=(V
in
+
+ V
in
-
)/2] remains within the specified range, the comparator will provide a stable output state.
However, the maximum current through the ESD diodes (IF) of the input stage must strictly be observed.
18 V
V
o
Output voltage 18 V
I
o
Output current 20 mA
I
F
Forward current in ESD protection diodes on inputs
(4)
4. Guaranteed by design.
50 mA
p
d
Power dissipation
(5)
DIP14
SO14
TSSOP14
5. Pd is calculated with T
amb
= +25 °C, T
j
= +150 °C and
R
thja
= 80 °C/W for DIP14 package
R
thja
= 150 °C/W for SO14 package
R
thja
= 175 °C/W for TSSOP14 package.
1500
830
710
mW
T
stg
Storage temperature range -65 to +150 °C
ESD
HBM: human body model
(6)
6. Human body model, 100pF discharged through a 1.5 kΩ resistor into pin of device.
50 V
MM: machine model
(7)
7. Machine model ESD, a 200 pF cap is charged to the specified voltage, then discharged directly into the IC
with no external series resistor (internal resistor < 5 Ω), into pin to pin of device.
40 V
CDM: charged device model 800 V