Datasheet

Absolute maximum ratings and operating conditions TL064
4/17 Doc ID 2295 Rev 3
2 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the
supply voltages where the zero reference level is the midpoint between V
CC
+
and V
CC
-
.
±18
VV
i
Input voltage
(2)
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,
whichever is less.
±15
V
id
Differential input voltage
(3)
3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
±30
P
tot
Power dissipation 680 mW
R
thja
Thermal resistance junction to ambient
(4)(5)
DIP14
SO-14
4. Short-circuits can cause excessive heating and destructive dissipation.
5. Rth are typical values.
80
105
°C/W
R
thjc
Thermal resistance junction to case
(4)(5)
DIP14
SO-14
33
31
Output short-circuit duration
(6)
6. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be
limited to ensure that the dissipation rating is not exceeded.
Infinite
T
stg
Storage temperature range -65 to +150 °C
ESD
HBM: human body model
(7)
7. Human body model: 100pF discharged through a 1.5kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
900
VMM: machine model
(8)
8. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins
of the device with no external series resistor (internal resistor < 5Ω), done for all couples of pin
combinations with other pins floating.
200
CDM: charged device model
(9)
9. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to the ground.
1500