Datasheet

TDA7419 Description of the audio processor
27/40
4.12 HPF applications
For HPF applications, HPF filter is available for additional processing after the speaker
control. It is a 2
nd
order butterworth highpass filter with selectable flat mode. Figure 22
shows the diagram of the HPF that includes an external RC network.
Figure 22. HPF diagram
4.13 Output selector and mixing
The output-selector allows the front and rear speakers to connect to different sources. The
setup of the output selector is shown in Figure 24. A Mixing-stage is placed after the front
speaker-attenuator and can be set to mixing-mode. Having a full volume-attenuator for the
mix-signal, the stage offers a wide flexibility to adapt the mixing levels.
Figure 23. Output selector
ACIN
/FILO
SE3IN
/AC2IN
ACOUT
/AC2OUT
External RC network
To
output
Gain Control
From speaker
BassL+BassR
Subwoofe
r
output
Rear
Front
Second
Main
Mix_in
Attenuator
Attenuator
Attenuator
Subwoofer
filter
Attenuator