Datasheet

TDA7418 Description of the audioprocessor
13/29
selected and an undesired mute would appear at the outputs. For such applications, it can
be switched in the AutoZero-Remain-Mode (Bit 6 of the subaddress-byte). If this bit is set to
high, the AutoZero will not be invoked and the old adjustment-value remains.
4.3 Loudness
There are four parameters programmable in the loudness stage:
4.3.1 Attenuation
Figure 4 shows the attenuation as a function of frequency at f
C
= 400Hz
Figure 4. Loudness attenuation @ f
C
= 400Hz.
4.3.2 Peak frequency
Figure 5 shows the four possible peak-frequencies at 400, 800 and 2400Hz
Figure 5. Loudness center frequencies @ Attn. = 15dB