Datasheet

September 2013 Doc ID 10260 Rev 4 1/14
1
TDA7376PD
2 x 35 W power amplifier for car radio
Features
High output power capability:
2 x 40 W max./4
–2 x 35 W/4 EIAJ
–2 x 25 W/4 @14.4 V, 1 kHz, 10 %
–2 x 25 W/2 @14.4 V, 1 kHz, 10 %
2 driving
Differential inputs
Minimum external components count
Internally fixed gain (26 dB)
Mute function (CMOS compatible)
Automute at minimum supply voltage detection
Standby function
No audible pop during mute and standby
operations
Clipping detector with programmable distortion
threshold
Protections:
Short circuit (out to ground, out to supply
voltage, across the load)
Overrating chip temperature with soft
thermal limiter
Load dump voltage
Fortuitous open ground
Loudspeaker DC current
–ESD
Description
The TDA7376PD is a new technology dual bridge
audio amplifier in PowerSO36 package designed
for car radio applications.
Thanks to the fully complementary PNP/NPN
output stage configuration the TDA7376PD
delivers a rail-to-rail voltage swing with no need of
bootstrap capacitors.
Differential input pairs, that will accept either
single ended or differential input signals,
guarantee high noise immunity making the device
suitable for both car radio and car boosters
applications.
The audio mute control, that attenuates the output
signal of the audio amplifiers, suppresses pop
on - off transients and cuts any noises coming
from previous stages. The standby control, that
de-biases the amplifiers, reduces the cost of the
power switch. The on-board programmable
distortion detector allows compression facility
whenever the amplifier is overdriven, so limiting
the distortion at any levels inside the presettable
range.
PowerSO36 (Slug up)
Table 1. Device summary
Order code Package Packing
TDA7376PD PowerSO36 Tube
TDA7376PDTR PowerSO36 Tape and reel
www.st.com

Summary of content (14 pages)