Datasheet

STWD100 Maximum ratings
Doc ID 14134 Rev 7 15/25
4 Maximum ratings
Stressing the device above the rating listed in Ta bl e 3 may cause permanent damage to the
device. These are stress ratings only and operation of the device at these or any other
conditions above those indicated in Table 4 of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability. Refer
also to the STMicroelectronics SURE program and other relevant quality documents.
Table 3. Absolute maximum ratings
Symbol Parameter Value Unit
T
STG
Storage temperature (V
CC
off) –55 to 150 °C
T
SLD
(1)
1. Reflow at peak temperature of 260 °C (total thermal budget not to exceed 245 °C for greater than 30 seconds).
Lead solder temperature for 10 seconds 260 °C
V
IO
Input or output voltage –0.3 to V
CC
+0.3 V
V
CC
Supply voltage –0.3 to 7.0 V
I
O
Output current 20 mA
P
D
Power dissipation 320 mW