Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsDiodesDiode Case type TO-262-3

February 2012 Doc ID 8373 Rev 6 1/11

STTH8L06

Turbo 2 ultrafast high voltage rectifier

Features

■ Ultrafast switching

■ Low reverse recovery current

■ Low thermal resistance

■ Reduces switching and conduction losses

■ Package insulation voltage:

– TO-220AC Ins: 2500 V rms

– TO-220FPAC: 2000 V DC

Description

The STTH8L06, which is using ST Turbo2 600 V

technology, is specially suited as boost diode in

discontinuous or critical mode power factor

corrections.

The device is also intended for use as a free

wheeling diode in power supplies and other power

switching applications.

Table 1. Device summary

Symbol Value

F(AV)

8 A

RRM

600 V

(max) 200 µA

175 °C

(typ) 0.85 V

(typ) 75 ns

TO-220AC

STTH8L06D

TO-220FPAC

STTH8L06FP

PAK

STTH8L06G

TO-220AC Insulated

STTH8L06DIRG

www.st.com

Summary of content (11 pages)

PAGE 1
STTH8L06 Turbo 2 ultrafast high voltage rectifier Features K ■ Ultrafast switching ■ Low reverse recovery current ■ Low thermal resistance ■ Reduces switching and conduction losses ■ Package insulation voltage: – TO-220AC Ins: 2500 V rms – TO-220FPAC: 2000 V DC K TO-220AC STTH8L06D K TO-220FPAC STTH8L06FP K A Description NC The STTH8L06, which is using ST Turbo2 600 V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections.
PAGE 2
Characteristics STTH8L06 1 Characteristics Table 2. Absolute ratings (limiting values) Symbol VRRM Parameter Repetitive peak reverse voltage 2 IF(RMS) IF(AV) Forward rms current Average forward current δ = 0.5 Value Unit 600 V TO-220AC / TO-220FPAC / D PAK 30 TO-220AC Ins. 24 TO-220AC / D2PAK Tc = 150 °C TO-220FPAC Tc = 125 °C TO-220AC Ins.
PAGE 3
STTH8L06 Figure 1. Characteristics Conduction losses versus average current Figure 2. Forward voltage drop versus forward current IFM(A) P(W) 100.0 11 δ = 0.1 δ = 0.05 10 δ = 0.2 δ = 0.5 Tj=150°C (maximum values) 9 δ=1 10.0 7 Tj=25°C (maximum values) Tj=150°C (typical values) 8 6 5 4 1.0 3 T 2 1 IF(AV)(A) δ=tp/T 0 0 2 Figure 3. 4 6 VFM(V) tp 0.1 8 10 0.0 Relative variation of thermal Figure 4. impedance junction to case versus pulse duration (TO-220FPAC) 1.0 0.9 0.
PAGE 4
Characteristics Figure 7. STTH8L06 Reverse recovery charges versus dIF/dt (typical values) Figure 8. Qrr(nC) Softness factor versus dIF/dt (typical values) S factor 1000 2.0 VR=400V Tj=125°C 900 IF=2 x IF(AV) IF≤2 x IF(AV) VR=400V Tj=125°C 1.8 800 1.6 IF=IF(AV) 700 1.4 600 1.2 IF=0.5 x IF(AV) 500 1.0 400 0.8 300 0.6 0.4 200 100 0.2 dIF/dt(A/µs) dIF/dt(A/µs) 0.0 0 0 20 Figure 9.
PAGE 5
STTH8L06 Characteristics Figure 13.
PAGE 6
Package information 2 STTH8L06 Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.4 N·m to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TO-220AC dimensions Dimensions Ref. Inches Min.
PAGE 7
STTH8L06 Package information Table 7. TO-220FPAC dimensions Dimensions Ref. A Millimeters Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 B H Dia L6 L7 L2 L3 L5 F1 D L2 L4 F E G1 G Doc ID 8373 Rev 6 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.
PAGE 8
Package information Table 8. STTH8L06 TO-220AC (Nins. & Ins. 20-up) dimensions Dimensions Ref. Millimeters Min. A ØI 15.20 a1 C B b2 L Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 4.80 5.40 0.189 0.212 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.
PAGE 9
STTH8L06 Package information Table 9. D2PAK dimensions Dimensions Ref. A E C2 L2 D L L3 A1 B2 R C B G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.
PAGE 10
Ordering information 3 STTH8L06 Ordering information Table 10. Ordering information Order code Marking Package Weight Base qty Delivery mode STTH8L06D STTH8L06D TO-220AC STTH8L06G 4 50 Tube 1.48 g 50 Tube 2 D PAK STTH8L066G-TR STTH8L06G D PAK 1.48 g 1000 Tape and reel STTH8L06FP STTH8L06FP TO-220FPAC 1.70 g 50 Tube STTH8L06DIRG STTH8L06DI TO-220AC Ins. 1.86 g 50 Tube Revision history Table 11. 10/11 STTH8L06G 1.
PAGE 11
STTH8L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.