Datasheet

Package information STPS20150C
6/10 Doc ID 7756 Rev 9
Devices in I
2
PAK with nickel-plated back frame must NOT be mounted by frame soldering
like SMDs. Such devices are intended to be through-hole mounted ONLY and in no
circumstances shall ST be held liable for any lack of performance or damage arising out of
soldering of nickel-plated back frames.
Table 6. I
2
PAK dimensions
Ref.
Dimensions
Millimeters Inches
Min. Max. Min. Max.
A 4.40 4.60 0.173 0.181
A1 2.40 2.72 0.094 0.107
b 0.61 0.88 0.024 0.035
b1 1.14 1.70 0.044 0.067
c 0.49 0.70 0.019 0.028
c2 1.23 1.32 0.048 0.052
D 8.95 9.35 0.352 0.368
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.195 0.203
E 10 10.40 0.394 0.409
L 13 14 0.512 0.551
L1 3.50 3.93 0.138 0.155
L2 1.27 1.40 0.050 0.055
E
L2
L1
b1
D
A1
c
c2
A
b
e
e1
L