Datasheet

STPM10 Theory of operation
Doc ID 17728 Rev 4 31/53
001110 14
KMOT 2
Selection of pulses for LED:
KMOT=0 Type 0 Active Energy
KMOT=1 Type 1 Active Energy
KMOT=2 Reactive Energy
KMOT=3 Apparent Energy
001111 15
(1)
010000 16 - 1 Reserved
1 Reserved010001 17
-
010010 18
BGTC 2 Band-gap temperature compensation bits. See Figure 17 for details.
010011 19
(1)
010100 20
CPH 4
4-bit unsigned data for compensation of phase error, 0°+0.576°.
16 values are possible with a compensation step of 0.0384°. When CPH=0 the
compensation is 0°, when CPH=15 the compensation is 0.576°.
010101 21
010110 22
010111 23
(1)
011000 24
CHV 8
8-bit unsigned data for voltage channel calibration.
256 values are possible. When CHV is 0 the calibrator is at -12.5% of the
nominal value. When CHV is 255 the calibrator is at +12.5%. The calibration
step is then 0.098%.
011001 25
011010 26
011011 27
011100 28
011101 29
011110 30
011111 31
(1)
100000 32
CHP 8
8-bit unsigned data for primary current channel calibration.
256 values are possible. When CHP is 0 the calibrator is at -12.5% of the
nominal value. When CHP is 255 the calibrator is at +12.5%. The calibration
step is then 0.098%.
100001 33
100010 34
100011 35
100100 36
100101 37
100110 38
100111 39
(1)
Table 11. Configuration bit map (continued)
Address
Name
n. of
bits
Description
(1)
6-bit
binary
DEC