Datasheet

STPIC6C595 Typical operating circuit
11/22
Figure 9. Reverse recovery current test circuits
Figure 10. Source drain diode waveform
Note: 1 A) The V
GG
amplitude and R
G
are adjusted for di/dt = 10 A/ μ s. A V
GG
double-pulse train is
used to set I
F
= 0.1 A. where t
1
= 10 μ s, t
2
= 7 μ s and t
3
= 3 μ s
2 B) The drain terminal under test is connected to the TPK test point. All other terminals are
connected together and connected to the TPA test point.
3C) I
RM
= maximum recovery current.