Datasheet

STP24DP05 Features description
Doc ID 14714 Rev 5 19/27
7.7 EFLAG/TFLAG - output detection and overtemperature
monitoring
The open drain output EFLAG and TFLAG are used to report the STP24DP05 status flags.
During normal operating conditions, the EFLAG/TFLAG pins should be pulled up through an
external resistor. The EFLAF is turned on (shorted to GND) while the error detection is
running. The TFLAG is turned on (shorted to GND) when the silicon temperature exceeds
180 °C.
Figure 16. TF and EF test circuit