Datasheet

STP16DPPS05 Electrical ratings
Doc ID 15817 Rev 2 5/34
2 Electrical ratings
2.1 Absolute maximum ratings
Stressing the device above the ratings listed in the “absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other condition above those indicated in the operating sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
2.2 Thermal data
Table 4. Absolute maximum ratings
Symbol Parameter Value Unit
V
DD
Supply voltage 0 to 7 V
V
O
Output voltage -0.5 to 20 V
I
O
Output current 50 mA
V
I
Input voltage -0.4 to V
DD
V
I
GND
GND terminal current 800 mA
f
CLK
Clock frequency 50 MHz
T
J
Junction temperature range
(1)
1. Such absolute value is based on the thermal shutdown protection.
-40 to +170 °C
Table 5. Thermal data
Symbol Parameter Value Unit
T
A
Operating free-air temperature range -40 to +125 °C
T
J-OPR
Operating thermal junction temperature range -40 to +150 °C
T
STG
Storage temperature range -55 to +150 °C
R
thJA
Thermal resistance junction-
ambient
(1)
1. According with JEDEC standard 51-7B
SO-24 42.7 °C/W
TSSOP24 55 °C/W
TSSOP24
(2)
Exposed Pad
2. The exposed pad should be soldered directly to the PCB to obtain the thermal benefits.
37.5 °C/W
QSOP-24 55 °C/W