Datasheet

UnitMaxMin
Conditions
(1)
ParameterSymbol
3 x
t
MASTER
Slave modeData output
access time
t
a(SO)
(3) (4)
25
Slave modeData output
disable time
t
dis(SO)
(3) (5)
65
(2)
Slave mode
(after enable edge)
Data output valid
time
t
v(SO)
(3)
30
Master mode
(after enable edge)
Data output valid
time
t
v(MO)
(3)
27
(2)
Slave mode
(after enable edge)
Data output hold
time
t
h(SO)
(3)
11
(2)
Master mode
(after enable edge)
Data output hold
time
t
h(MO)
(3)
(1)
Parameters are given by selecting 10 MHz I/O output frequency.
(2)
Data characterization in progress.
(3)
Values based on design simulation and/or characterization results, and not tested in
production.
(4)
Min time is for the minimum time to drive the output and the max time is for the maximum
time to validate the data.
(5)
Min time is for the minimum time to invalidate the output and the max time is for the
maximum time to put the data in Hi-Z.
DocID15590 Rev 882/116
STM8S903K3 STM8S903F3Electrical characteristics