Datasheet

Electrical characteristics STM8S207xx, STM8S208xx
86/103 Doc ID 14733 Rev 12
Electromagnetic interference (EMI)
Emission tests conform to the SAE IEC 61967-2 standard for test software, board layout and
pin loading.
Absolute maximum ratings (electrical sensitivity)
Based on two different tests (ESD and LU) using specific measurement methods, the
product is stressed in order to determine its performance in terms of electrical sensitivity.
For more details, refer to the application note AN1181.
Electrostatic discharge (ESD)
Electrostatic discharges (3 positive then 3 negative pulses separated by 1 second) are
applied to the pins of each sample according to each pin combination. The sample size
depends on the number of supply pins in the device (3 parts*(n+1) supply pin). This test
conforms to the JESD22-A114A/A115A standard. For more details, refer to the application
note AN1181.
Table 48. EMI data
Symbol Parameter
Conditions
Unit
General conditions
Monitored
frequency band
Max f
HSE
/f
CPU
(1)
8 MHz/
8 MHz
8 MHz/
16 MHz
8 MHz/
24 MHz
S
EMI
Peak level
V
DD
= 5 V
T
A
= 25 °C
LQFP80 package
conforming to SAE IEC
61967-2
0.1MHz to 30 MHz 15 20 24
dBµV30 MHz to 130 MHz 18 21 16
130 MHz to 1 GHz -1 1 4
SAE EMI
level
SAE EMI level 2 2.5 2.5
1. Data based on characterization results, not tested in production.
Table 49. ESD absolute maximum ratings
Symbol Ratings Conditions Class
Maximum
value
(1)
1. Data based on characterization results, not tested in production.
Unit
V
ESD(HBM)
Electrostatic discharge voltage
(Human body model)
T
A
= 25°C, conforming to
JESD22-A114
A2000V
V
ESD(CDM)
Electrostatic discharge voltage
(Charge device model)
T
A
= 25°C, conforming to
JESD22-C101
IV 1000 V