Datasheet

Figure 23: Typical LSI accuracy vs V
DD
@ 4 temperatures
Memory characteristics10.3.5
RAM and hardware registers
Table 36: RAM and hardware registers
UnitMinConditionsParameterSymbol
VV
IT-max
(2)
Halt mode (or reset)Data retention mode
(1)
V
RM
(1)
Minimum supply voltage without losing data stored in RAM (in halt mode or under reset)
or in hardware registers (only in halt mode). Guaranteed by design, not tested in production.
refer to Operating conditions for the value of V
IT-max
(2)
Refer to the Operating conditions section for the value of V
IT-max
Flash program memory/data EEPROM memory
General conditions: T
A
= -40 to 125°C.
Table 37: Flash program memory/data EEPROM memory
UnitMaxTypMin
(1)
ConditionsParameterSymbol
V5.52.95f
CPU
≤ 16 MHzOperating voltage (all modes,
execution/write/erase)
V
DD
ms6.66.0Standard programming time
(including erase) for
t
prog
byte/word/block (1 byte/4
bytes/128 bytes)
DocID14771 Rev 1278/124
STM8S105xxElectrical characteristics