Datasheet

Loading capacitor10.1.5
The loading conditions used for pin parameter measurement are shown in the following figure.
Figure 9: Pin loading conditions
STM8 PIN
50 pF
Pin input voltage10.1.6
The input voltage measurement on a pin of the device is described in the following figure.
Figure 10: Pin input voltage
STM8 PIN
V
IN
Absolute maximum ratings10.2
Stresses above those listed as ‘absolute maximum ratings’ may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 16: Voltage characteristics
UnitMaxMinRatingsSymbol
V6.5-0.3Supply voltage (including V
DDA and
V
DDIO
)
(1)
V
DDx
- V
SS
6.5V
SS
- 0.3Input voltage on true open drain pins (PE1,
PE2)
(2)
V
IN
DocID14771 Rev 1256/124
STM8S105xxElectrical characteristics