Datasheet

[ ] 1: Set
[ ] 0: Reset
UBC bit1
[ ] 1: Set
[ ] 0: Reset
UBC bit2
[ ] 1: Set
[ ] 0: Reset
UBC bit3
[ ] 1: Set
[ ] 0: Reset
UBC bit4
[ ] 1: Set
[ ] 0: Reset
UBC bit5
[ ] 1: Set
OPT2 alternate function remapping
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
AFR0
(check only one option)
[ ] 1: Port D3 alternate function = ADC_ETR
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
AFR1
(check only one option)
[ ] 1: Port A3 alternate function = TIM3_CH1, port D2 alternate
function = TIM2_CH3.
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
AFR2
(check only one option)
[ ] 1: Port D0 alternate function = CLK_CCO.
Note: If both AFR2 and AFR3 are activated, AFR2 option
has priority over AFR3.
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
AFR3
(check only one option)
[ ] 1: Port D0 alternate function = TIM1_BKIN.
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
AFR4
(check only one option)
[ ] 1: Port D7 alternate function = TIM1_CH4.
[ ] 0: Remapping option inactive. Default alternate functions used.
Refer to pinout description.
AFR5
(check only one option)
115/124DocID14771 Rev 12
Ordering informationSTM8S105xx