Datasheet

.............................................................................................Contact

.............................................................................................Phone no.

.............................................................................................Reference FASTROM code

Preferable format for programing code is .Hex (.s19 is accepted)

If data EEPROM programing is required, a seperate file must be sent with the requested data.

Important: See the option byte section in the datasheet for authorized option byte

combinations and a detailed explanation.

Device type/memory size/package (check only one option)

32 Kbyte16 KbyteFASTROM device

[ ] STM8S105K6[ ] STM8S105K4LQFP32

[ ] STM8S105S6[ ] STM8S105S4LQFP44

[ ] STM8S105C6[ ] STM8S105C4LQFP48

Conditioning (check only one option)

[ ] Tape & reel or [ ] Tray

Special marking (check only one option)

[ ] No [ ] Yes

Authorized characters are letters, digits, '.', '-', '/' and spaces only. Maximum character counts

are:

LQFP32: 2 lines of 7 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"

LQFP44: 2 lines of 7 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"

LQFP48: 2 lines of 8 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"

Temperature range

[ ] -40°C to +85°C or [ ] -40°C to +125°C

Padding value for unused program memory (check only one option)

Fixed value[ ]0xFF

TRAP instruction opcode[ ]0x83

Illegal opcode (causes a reset when executed)[ ]0x75

OPT0 memory readout protection (check only one option)

[ ] Disable or [ ] Enable

OPT1 user boot code area (UBC)

0x(_ _) fill in the hexadecimal value, refering to the datasheet and the binary format below.

[ ] 0: Reset

UBC, bit0

FASTROM code name is assigned by STMicroelectronics.

DocID14771 Rev 12114/124

STM8S105xxOrdering information