Datasheet

.............................................................................................Address
.............................................................................................Contact
.............................................................................................Phone no.
.............................................................................................Reference FASTROM code
a
Preferable format for programing code is .Hex (.s19 is accepted)
If data EEPROM programing is required, a seperate file must be sent with the requested data.
Important: See the option byte section in the datasheet for authorized option byte
combinations and a detailed explanation. Do not use more than one remapping option
in the same port. It is forbidden to enable both AFR1 and AFR0.
Device type/memory size/package (check only one option)
8 Kbyte4 KbyteFASTROM device
[ ] STM8S103K3LQFP32
[ ] STM8S103F3[ ] STM8S103F2UFQFPN20
[ ] STM8S103K3UFQFPN32
[ ] STM8S103F3[ ] STM8S103F2TSSOP20
[ ] STM8S103F3[ ] STM8S103F2SO20W
Conditioning (check only one option)
[ ] Tape & reel or [ ] Tray
Special marking (check only one option)
[ ] No [ ] Yes
Authorized characters are letters, digits, '.', '-', '/' and spaces only. Maximum character counts
are:
UFQFPN20: 1 line of 4 characters max: "_ _ _ _"
UFQFPN32: 1 line of 7 characters max: "_ _ _ _ _ _ _"
LQFP32: 2 lines of 7 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"
TSSOP20/SO20: 1 line of 10 characters max: "_ _ _ _ _ _ _ _ _ _"
Three characters are reserved for code identification.
Temperature range
[ ] -40°C to +85°C or [ ] -40°C to +125°C
Padding value for unused program memory (check only one option)
Fixed value[ ]0xFF
TRAP instruction opcode[ ]0x83
Illegal opcode (causes a reset when executed)[ ]0x75
a
FASTROM code name is assigned by STMicroelectronics.
107/117DocID15441 Rev 9
Ordering informationSTM8S103K3 STM8S103F3 STM8S103F2