Datasheet

Electrical parameters STM8L151xx, STM8L152xx
68/131 DocID15962 Rev 13
Figure 13. Typ. I
DD(RUN)
vs. V
DD
,f
CPU
= 16MHz
1. Typical current consumption measured with code executed from RAM
5. CPU executing typical data processing
6. The run from RAM consumption can be approximated with the linear formula:
I
DD
(run_from_RAM) = Freq * 90 µA/MHz + 380 µA
7. Oscillator bypassed (HSEBYP = 1 in CLK_ECKCR). When configured for external crystal, the HSE consumption
(I
DD HSE
) must be added. Refer to Ta b l e 31.
8. Tested in production.
9. The run from Flash consumption can be approximated with the linear formula:
I
DD
(run_from_Flash) = Freq * 195 µA/MHz + 440 µA
10. Oscillator bypassed (LSEBYP = 1 in CLK_ECKCR). When configured for extenal crystal, the LSE consumption
(I
DD LSE
) must be added. Refer to Table 32.
1.50
1.75
2.00
2.25
2.50
2.75
3.00
1.6 2.1 2.6 3.1 3.6
V
DD
[V]
IDD(RUN)HSI [mA]
-40°C
25°C
90°C
130°C
ai18213