Datasheet
Table Of Contents
- Table 1. Device summary
- 1 Description
- Figure 1. Logic diagram (STM6821/6822/6823)
- Figure 2. Logic diagram (STM6321/6322/6824/6825)
- Table 2. Signal names
- Figure 3. STM6822/6823 SOT23-5 connections
- Figure 4. STM6821 SOT23-5 connections
- Figure 5. STM6322/6825 SOT23-5 connections
- Figure 6. STM6321/6824 SOT23-5 connections
- 1.1 Pin descriptions
- 2 Operation
- 3 Typical operating characteristics
- Figure 15. VCC-to-reset output delay vs. temperature
- Figure 16. Supply current vs. temperature
- Figure 17. MR-to-reset output delay vs. temperature
- Figure 18. Normalized power-up trec vs. temperature
- Figure 19. Normalized reset threshold voltage vs. temperature
- Figure 20. Normalized power-up watchdog timeout period
- Figure 21. Voltage output low vs. ISINK
- Figure 22. Voltage output high vs. ISOURCE
- Figure 23. Maximum transient duration vs. reset threshold overdrive
- 4 Maximum ratings
- 5 DC and AC parameters
- 6 Package mechanical data
- 7 Package mechanical data
- 8 Part numbering
- 9 Revision history
Maximum ratings STM6321, STM6322, STM6821, STM6822, STM6823, STM6824, STM6825
18/31 Doc ID 11110 Rev 12
4 Maximum ratings
Stressing the device above the rating listed in Table 4: Absolute maximum ratings may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in Table 5: Operating and AC
measurement conditions of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability. Refer also to the
STMicroelectronics
™ SURE program and other relevant quality documents.
Table 4. Absolute maximum ratings
Symbol Parameter Value Unit
T
STG
Storage temperature (V
CC
off) –55 to 150 °C
T
SLD
(1)
1. Reflo
w at peak temperature of 260 °C (total thermal budget not to exceed 245 °C for greater than 30 seconds)
.
Lead solder temperature for 10 seconds 260 °C
V
IO
Input or output voltage –0.3 to V
CC
+ 0.3 V
V
CC
Supply voltage –0.3 to 7.0 V
I
O
Output current 20 mA
P
D
Power dissipation 320 mW