Datasheet
Table Of Contents
- Table 1. Device summary
- 1 Description
- Figure 1. Logic diagram (STM6717/18)
- Figure 2. Logic diagram (STM6777/78)
- Figure 3. Logic diagram (STM6719/20)
- Figure 4. Logic diagram (STM6779/80)
- Table 2. Signal names
- Figure 5. STM6717/18 SOT23-5 connections
- Figure 6. STM6777/78 SOT23-6 connections
- Figure 7. STM6719/20 SOT23-6 connections
- Figure 8. STM6779/80 SOT23-6 connections
- 1.1 Pin descriptions
- 1.1.1 Active-low, push-pull reset output (RST) - STM6718/20/78/80
- 1.1.2 Active-low, open drain reset output (RST) - STM6717/19/77/79
- 1.1.3 Push-button reset input (MR)
- 1.1.4 Manual reset delay input (MRC) - STM6777/78/79/80)
- 1.1.5 Primary supply voltage monitoring input (VCC1)
- 1.1.6 Secondary supply voltage monitoring input (VCC2)
- 1.1.7 Adjustable reset comparator input (RSTIN; STM6719/20/79/80)
- 2 Operation
- 3 Typical operating characteristics
- Figure 13. Supply current vs. temperature (VCC1 = 5.5 V; VCC2 = 3.6 V)
- Figure 14. Supply current vs. temperature (VCC1 = 3.6 V; VCC2 = 2.75 V)
- Figure 15. Supply current vs. temperature (VCC1 = 3.0 V; VCC2 = 2.0 V)
- Figure 16. Supply current vs. temperature (VCC1 = 2.0 V; VCC2 = 1.0 V)
- Figure 17. Normalized VCC reset time-out period vs. temperature
- Figure 18. Maximum VCC transient duration vs. reset threshold overdrive
- Figure 19. Normalized VRST1 threshold vs. temperature
- Figure 20. Normalized VRST2 threshold vs. temperature
- Figure 21. Reset input threshold vs. temperature
- Figure 22. VCC1-to-reset delay vs. temperature
- Figure 23. Reset input-to-reset output delay vs. temperature
- Figure 24. MR-to-reset output delay vs. temperature (VCC1 = 3.6V)
- 4 Maximum rating
- 5 DC and AC parameters
- 6 Package mechanical data
- Figure 28. SOT23-5 - 5-lead small outline transistor package mechanical drawing
- Table 8. SOT23-5 - 5-lead small outline transistor package mechanical data
- Figure 29. SOT23-6 - 6-lead small outline transistor package mechanical drawing
- Table 9. SOT23-6 - 6-lead small outline transistor package mechanical data
- Figure 30. Carrier tape for SOT23-5L and SOT23-6L
- Table 10. Carrier tape dimensions for SOT23-5L and SOT23-6L
- 7 Part numbering
- 8 Revision history
STM6717/6718/6719/6720/STM6777/6778/6779/6780
30/30 Doc ID 11469 Rev 8
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com