Datasheet
Table Of Contents
- Table 1. Device summary
- 1 Description
- Figure 1. Logic diagram (STM6717/18)
- Figure 2. Logic diagram (STM6777/78)
- Figure 3. Logic diagram (STM6719/20)
- Figure 4. Logic diagram (STM6779/80)
- Table 2. Signal names
- Figure 5. STM6717/18 SOT23-5 connections
- Figure 6. STM6777/78 SOT23-6 connections
- Figure 7. STM6719/20 SOT23-6 connections
- Figure 8. STM6779/80 SOT23-6 connections
- 1.1 Pin descriptions
- 1.1.1 Active-low, push-pull reset output (RST) - STM6718/20/78/80
- 1.1.2 Active-low, open drain reset output (RST) - STM6717/19/77/79
- 1.1.3 Push-button reset input (MR)
- 1.1.4 Manual reset delay input (MRC) - STM6777/78/79/80)
- 1.1.5 Primary supply voltage monitoring input (VCC1)
- 1.1.6 Secondary supply voltage monitoring input (VCC2)
- 1.1.7 Adjustable reset comparator input (RSTIN; STM6719/20/79/80)
- 2 Operation
- 3 Typical operating characteristics
- Figure 13. Supply current vs. temperature (VCC1 = 5.5 V; VCC2 = 3.6 V)
- Figure 14. Supply current vs. temperature (VCC1 = 3.6 V; VCC2 = 2.75 V)
- Figure 15. Supply current vs. temperature (VCC1 = 3.0 V; VCC2 = 2.0 V)
- Figure 16. Supply current vs. temperature (VCC1 = 2.0 V; VCC2 = 1.0 V)
- Figure 17. Normalized VCC reset time-out period vs. temperature
- Figure 18. Maximum VCC transient duration vs. reset threshold overdrive
- Figure 19. Normalized VRST1 threshold vs. temperature
- Figure 20. Normalized VRST2 threshold vs. temperature
- Figure 21. Reset input threshold vs. temperature
- Figure 22. VCC1-to-reset delay vs. temperature
- Figure 23. Reset input-to-reset output delay vs. temperature
- Figure 24. MR-to-reset output delay vs. temperature (VCC1 = 3.6V)
- 4 Maximum rating
- 5 DC and AC parameters
- 6 Package mechanical data
- Figure 28. SOT23-5 - 5-lead small outline transistor package mechanical drawing
- Table 8. SOT23-5 - 5-lead small outline transistor package mechanical data
- Figure 29. SOT23-6 - 6-lead small outline transistor package mechanical drawing
- Table 9. SOT23-6 - 6-lead small outline transistor package mechanical data
- Figure 30. Carrier tape for SOT23-5L and SOT23-6L
- Table 10. Carrier tape dimensions for SOT23-5L and SOT23-6L
- 7 Part numbering
- 8 Revision history
DC and AC parameters STM6717/6718/6719/6720/STM6777/6778/6779/6780
18/30 Doc ID 11469 Rev 8
5 DC and AC parameters
This section summarizes the operating measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC characteristics tables that
follow, are derived from tests performed under the measurement conditions summarized in
Table 5: Operating and AC measurement conditions. Designers should check that the
operating conditions in their circuit match the operating conditions when relying on the
quoted parameters.
Figure 25. AC testing input/output waveforms
Figure 26. MR
timing waveform (STM6717/18/19/20)
Figure 27. MR
timing waveform (STM6777/78/79/80)
1. By connecting a certain capacitor between the MRC pin and V
SS
, the RST can be delayed from 6 µs or
more (t
MLMH
, see Table 7 on page 21).
Table 5. Operating and AC measurement conditions
Parameter STM67xx Unit
V
CC
supply voltage 0.8 to 5.5 V
Ambient operating temperature (T
A
) –40 to 85 °C
Input rise and fall times ≤ 5ns
Input pulse voltages 0.2 to 0.8V
CC
V
Input and output timing ref. voltages 0.3 to 0.7V
CC
V
AI02568
0.8V
CC
0.2V
CC
0.7V
CC
0.3V
CC
AI10423a
RST
MR
t
MLRL
t
rec
t
MLMH
AI10424c
RST
MR
t
rec
t
MLMH
(1)
t
MLRL