Datasheet

STM6524 Description
Doc ID 022335 Rev 3 7/24
Figure 3. Block diagram
Table 1. Signal names
Pin Name Type Description
1 V
SS
Supply ground Ground
2 SR1
Input Secondary push-button Smart Reset™ input. Active low. Optional pull-up resistor.
3 RST
Output
Reset output
(open drain with optional pull-up resistor, active low)
(push-pull – active low or active high)
4 NC - Not connected (not bonded; should be connected to V
SS
)
5 SR0
Input Primary push-button Smart Reset™ input. Active low. Optional pull-up resistor.
6 V
CC
Supply voltage
Positive supply voltage for the device. A 0.1 µF decoupling ceramic capacitor is
recommended to be connected between V
CC
and V
SS
pins, as close to the STM6524
device as possible.
T
32#
GENERATOR
T
2%#
GENERATOR
OPTIONAL
234
!.$
/VERVOLTAGEDETECT
 TESTMODETRIGGER
32
32

!-6