Datasheet

DC and AC parameters STM6522
14/25 Doc ID 17045 Rev 3
5 DC and AC parameters
This section summarizes the operating measurement conditions, and the DC and AC
characteristics of the device. The parameters in Table 5: DC and AC characteristics that
follows, are derived from tests performed under the measurement conditions summarized in
Table 4: Operating and measurement conditions. Designers should check that the operating
conditions in their circuit match the operating conditions when relying on the quoted
parameters.
Figure 12. AC testing input/output waveforms
Table 4. Operating and measurement conditions
Parameter Value Unit
V
CC
supply voltage 1.65 to 5.5 V
Ambient operating temperature (T
A
) –40 to +85 °C
Input rise and fall times ≤
5ns
Input pulse voltages 0.2 to 0.8 V
CC
V
Input and output timing ref. voltages 0.3 to 0.7 V
CC
V
0.8 V
CC
0.2 V
CC
0.7 V
CC
0.3 V
CC
AM00478