Datasheet

STM6519 DC and AC parameters
Doc ID 022111 Rev 6 15/25
8 DC and AC parameters
This section summarizes the operating measurement conditions, and the DC and AC
characteristics of the device. The parameters in Table 4: DC and AC characteristics are
derived from tests performed under the measurement conditions summarized in Table 3:
Operating and measurement conditions. Designers should check that the operating
conditions in their circuit match the operating conditions when relying on the quoted
parameters.
Table 3. Operating and measurement conditions
Symbol Parameter Value Unit
V
CC
Supply voltage 2.0 to 5.5 V
T
A
Ambient operating temperature -40 to +85 °C
t
R
, t
F
Input rise and fall times ≤ 5ns
Input pulse voltages 0.2 to 0.8 V
CC
V
Input and output timing reference voltages 0.3 to 0.7 V
CC
V