Datasheet

UM01018 Connectors
Doc ID 18141 Rev 2 23/42
3.6 ST-LINK/V2 USB type B connector CN11
The USB connector, CN11, is used to connect the embedded ST-LINK/V2 to the PC for
board debugging.
Figure 8. USB type B connector CN11 (viewed from front)
3.7 User USB Type B connector CN1
Figure 9. USB type B connector CN1 (viewed from front)
3.8 Audio jack CN3
A 3.5 mm stereo audio jack, CN3, connected to audio DAC is available.
Table 17. USB type B connector CN11
Pin number Description Pin number Description
1 VBUS (power) 4 GND
2 DM 5,6 Shield
3DP
-36
Table 18. USB type B connector CN1
Pin number Description Pin number Description
1 VBUS (power) 4 GND
2 DM 5 Shield
3 DP 6 Shield
-36