Datasheet

Revision History STM32L15xCC STM32L15xRC STM32L15xUC STM32L15xVC
130/132 DocID022799 Rev 6
12-Nov-2013 5
Updated Section 3.15: Touch sensing.
Added V
DD
= 1.71 to 1.8 V operating power supply range in Table 5:
Functionalities depending on the working mode (from Run/active
down to standby)
Renamed "I/O Level" to "I/O structure" in Table 9: STM32L15xxC pin
definitions, added the I/O structure for PC14, PC15, PC3, PH0, PH1,
PA3, PA4, PA5, PB0, PE7, PE8, PE9, PE10, NRST and BOOT0
Updated Table 11: Voltage characteristics added row
Updated Table 12: Current characteristics replaced with the one
inside STM32L15xxBxxA datasheet.
Updated Table 14: General operating conditions, footnote and added
row.
Updated Table 16: Embedded internal reference voltage calibration
values and moved inside Section 6.3.3: Embedded internal reference
voltage
Updated Section 6.3.4: Supply current characteristics.
Updated Table 18: Current consumption in Run mode, code with data
processing running from Flash.
Updated Table 19: Current consumption in Run mode, code with data
processing running from RAM.
Created Section 6.3.5: Wakeup time from low-power mode.
Updated Chapter 6.3.6: External clock source characteristics.
Updated Table 27: High-speed external user clock characteristics.
Moved Figure 15: High-speed external clock source AC timing
diagram after Table 27: High-speed external user clock
characteristics.
Updated Table 29: HSE oscillator characteristics.
Updated Section 6.3.11: Electrical sensitivity characteristics (title).
Updated Section 6.3.12: I/O current injection characteristics.
Updated Table 42: I/O current injection susceptibility and added
footnote.
Updated Table 43: I/O static characteristics
Updated Section 6.3.14: NRST pin characteristics.
Updated Table 56: ADC characteristics.
Added footnote
(5)
and
(6)
in Table 56: ADC characteristics
Updated THD values and added 4 more rows ENOB, SINAD, SNR,
THD in Table 57: ADC accuracy
Updated “SDA data hold time” and “SDA and SCL rise time” values
and added “Pulse width of spikes that are suppressed by the analog
filter” row in
Table 48: I2C characteristics
Updated direct channels VDDA range in Table 58: RAIN max for
fADC = 16 MHz
Moved Table 61: Temperature sensor calibration values and moved
inside Section 6.3.20: Temperature sensor characteristics
Updated I
DD
(WU from Standby) unit in Table 24: Typical and
maximum current consumptions in Standby mode.
Updated Table 67: LQFP64, 10 x 10 mm 64-pin low-profile quad flat
package mechanical data
Updated Chapter 8: Part numbering (title).
Table 74. Document revision history (continued)
Date Revision Changes