Datasheet

Revision history STM32F303xB STM32F303xC
130/133 DocID023353 Rev 7
9 Revision history
Table 81. Document revision history
Date Revision Changes
22-Jun-2012 1 Initial release
07-Sep-2012 2
Modified Features on cover page.
Modified Table 2: STM32F301xx family device features and peripheral
counts
Added clock tree to Section 3.8: Clocks and startup
Added Table 5: STM32F303xB/STM32F303xC I2C implementation
Added Table 6: USART features
Added Table 7: STM32F303xB/STM32F303xC SPI/I2S
implementation
Modified Table 8: Capacitive sensing GPIOs available on
STM32F303xB/STM32F303xC devices
Modified Figure 4, Figure 5 and Figure 6:
STM32F303xB/STM32F303xC LQFP100 pinout
Modified Table 11: STM32F303xB/STM32F303xC pin definitions
Modified Figure 10: Power supply scheme
Modified Table 19: Voltage characteristics
Modified Table 20: Current characteristics
Modified Table 23: Operating conditions at power-up / power-down
Added footnote to Table 29: Typical and maximum current
consumption from the VDDA supply
Added footnote to Tab le 33 and Table 34: Typical current consumption
in Sleep mode, code running from Flash or RAM
Removed table “Switching output I/O current consumption” and table
“Peripheral current consumption”
Added note under Figure 16: Typical application with a 32.768 kHz
crystal
Updated Table 42: HSI oscillator characteristics
Updated Wakeup time from low-power mode and Table 37: Low-power
mode wakeup timings
Updated Table 45: Flash memory characteristics
Updated Table 50: Electrical sensitivities
Updated Table 51: I/O current injection susceptibility
Updated Table 52: I/O static characteristics
Updated Table 53: Output voltage characteristics
Updated Table 55: NRST pin characteristics
Updated Table 61: SPI characteristics
Updated Table 62: I2S characteristics
Corrected LQFP100 in Section 7.2.3: Selecting the product
temperature range
21-Sep-2012 3 Updated Table 61: SPI characteristics