Datasheet

STM32F103x4, STM32F103x6 Electrical characteristics
Doc ID 15060 Rev 6 41/90
Figure 18. Typical current consumption in Standby mode versus temperature at
V
DD
= 3.3 V and 3.6 V
Typical current consumption
The MCU is placed under the following conditions:
● All I/O pins are in input mode with a static value at V
DD
or V
SS
(no load).
● All peripherals are disabled except if it is explicitly mentioned.
● The Flash access time is adjusted to f
HCLK
frequency (0 wait state from 0 to 24 MHz, 1
wait state from 24 to 48 MHz and 2 wait states above).
● Ambient temperature and V
DD
supply voltage conditions summarized in Ta bl e 9 .
● Prefetch is ON (Reminder: this bit must be set before clock setting and bus prescaling)
● When the peripherals are enabled f
PCLK1
= f
HCLK
/4, f
PCLK
2 = f
HCLK
/2, f
ADCCLK
=
f
PCLK2
/4
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
–45 °C 25 °C 85 °C 105 °C
Temperature (°C)
Consumption (µA)
3.3 V
3.6 V