Datasheet

Electrical characteristics STM32F103x4, STM32F103x6
34/90 Doc ID 15060 Rev 6
Table 11. Embedded reset and power control block characteristics
Symbol Parameter Conditions Min Typ Max Unit
V
PVD
Programmable voltage
detector level selection
PLS[2:0]=000 (rising edge) 2.1 2.18 2.26 V
PLS[2:0]=000 (falling edge) 2 2.08 2.16 V
PLS[2:0]=001 (rising edge) 2.19 2.28 2.37 V
PLS[2:0]=001 (falling edge) 2.09 2.18 2.27 V
PLS[2:0]=010 (rising edge) 2.28 2.38 2.48 V
PLS[2:0]=010 (falling edge) 2.18 2.28 2.38 V
PLS[2:0]=011 (rising edge) 2.38 2.48 2.58 V
PLS[2:0]=011 (falling edge) 2.28 2.38 2.48 V
PLS[2:0]=100 (rising edge) 2.47 2.58 2.69 V
PLS[2:0]=100 (falling edge) 2.37 2.48 2.59 V
PLS[2:0]=101 (rising edge) 2.57 2.68 2.79 V
PLS[2:0]=101 (falling edge) 2.47 2.58 2.69 V
PLS[2:0]=110 (rising edge) 2.66 2.78 2.9 V
PLS[2:0]=110 (falling edge) 2.56 2.68 2.8 V
PLS[2:0]=111 (rising edge) 2.76 2.88 3 V
PLS[2:0]=111 (falling edge) 2.66 2.78 2.9 V
V
PVDhyst
(2)
PVD hysteresis 100 mV
V
POR/PDR
Power on/power down
reset threshold
Falling edge
1.8
(1)
1. The product behavior is guaranteed by design down to the minimum V
POR/PDR
value.
1.88 1.96 V
Rising edge 1.84 1.92 2.0 V
V
PDRhyst
(2)
PDR hysteresis 40 mV
T
RSTTEMPO
(2)
2. Guaranteed by design, not tested in production.
Reset temporization 1 2.5 4.5 ms